Hi All,
Just wanted to pass this along. I found myself in need of the cork gasket
to fit in the sediment bowl on two of the CUBs this past summer. Could not
find any anywhere. So I got to thinking that I had a roll of fine cork that
I got at the hobby store to make roads/parking lots for the HO train layout. I took some and my ole [1963] compas with trammel points
[sharpe needle like points] and slowly began to turn the circles out and
they cut right through the 1/8" cork. I then cut the centers out the same
way.
A poor man can make do, if you know what I mean.
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Cork Gaskets-Small round
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 251
- Joined: Sun Feb 09, 2003 10:05 pm
- Location: MS, Oxford
-
- 10+ Years
- Posts: 1224
- Joined: Sun Feb 02, 2003 1:11 pm
- Zip Code: 28001
- Location: Albemarle, North Carolina 28001
NAPA has them and the CIH dealer has the whole thing.
Fuel Strainer Screen 49923D Balkamp(NAPA) 730-2373
Fuel Strainer Gasket 360679R1 Balkamp(NAPA) 730-9506
Check this url out
http://www.tmtractor.com/fl/fuel_strainer_001.htm
Fuel Strainer Screen 49923D Balkamp(NAPA) 730-2373
Fuel Strainer Gasket 360679R1 Balkamp(NAPA) 730-9506
Check this url out
http://www.tmtractor.com/fl/fuel_strainer_001.htm
Young man for work, old man for advice
-
- 10+ Years
- Posts: 661
- Joined: Wed Mar 05, 2003 9:09 pm
- Zip Code: 18603
- Tractors Owned: 1948 Cub
1955 Cub - Location: PA, Berwick
Russ. Another tip on cutting gaskets when they have a tendency to move is: Apply a piece or more (depending on gasket size) of double sided tape (easy peeling stuff so gasket doesn't get ruined taking off) on a board when cutting. I have also cut rubber gaskets on a machine with fly cutter and the tape holds well.........
Ron
-
- Similar Topics
- Replies
- Views
- Last post
-
- 0
- 149
-
by pett3227b
Fri Sep 15, 2023 7:43 am
-
- 13
- 573
-
by Urbish
Thu Oct 26, 2023 6:54 am
-
- 23
- 773
-
by Shadow_storm56
Tue Jul 13, 2021 7:56 pm
-
- 24
- 725
-
by Stanton
Sun Jul 24, 2022 3:26 pm
-
- 4
- 255
-
by dtu2179
Sun Nov 07, 2021 12:35 pm
Who is online
Users browsing this forum: No registered users and 2 guests