Reading all the threads concerning regulators I found that this model requires a VR800 resistor package.
Can anyone confirm this?
I've a 1101355 generator, I replaced burnt cutout with VR850, NAPA people didn't mention a resistor package.
Problem I've got now is a pegged negative ammeter reading and a rebuilt generator thats to hot to touch.
Before I go and do any tests I don't want to be spinning my wheels.
As far as new for the regulator was the L terminal.
I ran a wire from L terminal to my kill/run switch per schematics at Bob Melville's site.
Thanks
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Echlin VR850 Regulator??
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- Similar Topics
- Replies
- Views
- Last post
-
- 25
- 546
-
by tst
Fri Jan 19, 2024 5:19 pm
-
- 1
- 159
-
by Jim Becker
Thu Feb 15, 2024 7:29 pm
-
- 12
- 391
-
by inairam
Wed Oct 26, 2022 3:09 pm
-
-
Voltage regulator VR851 -bad? Attachment(s)
by brewzalot » Wed Nov 09, 2022 11:57 am » in Farmall Cub - 18
- 616
-
by halftonstude
Sun Nov 27, 2022 2:10 pm
-
-
-
NAPA 6 volt regulator - with resister? Attachment(s)
by inairam » Tue Jul 19, 2022 9:58 am » in Farmall Cub - 8
- 499
-
by Glen
Wed Jan 17, 2024 4:25 pm
-
Who is online
Users browsing this forum: Majestic-12 [Bot] and 9 guests