Well I did an inventory of my cultivator parts and it appears I am missing some pieces.
I am missing the left rear gang and the rear pressure rods. The pressure rod in this picture is in pretty bad shape.
http://community.webshots.com/photo/241 ... 1722LjGDBq
http://community.webshots.com/photo/241 ... 2514LskeDH
Please look over these pics and tell me if I need any thing else. Sorry for the poor quality. I was getting dark and I had to use the flood light.
http://community.webshots.com/album/241870344ZwZNte
Where can I get replacement parts?
TBAR
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Missing Cultivator Parts
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 52
- Joined: Mon Jun 28, 2004 8:15 am
- Location: Texas
Missing Cultivator Parts
IH2444 & 1949 Farmall Cub
-
- Team Cub Guide
- Posts: 3544
- Joined: Sun Feb 02, 2003 6:30 pm
- Zip Code: 38658
- eBay ID: Cub-Bud
- Tractors Owned: Four FCUBs, one IH Lo-Boy, one B Farmall, two Cadets, and a John Deere B.
- Circle of Safety: Y
- Location: MS, Pope
-
- Cub Pro
- Posts: 72
- Joined: Thu May 29, 2003 8:39 am
- Location: Pennsylvania
-
- 10+ Years
- Posts: 52
- Joined: Mon Jun 28, 2004 8:15 am
- Location: Texas
AlBie wrote:Hi TBAR:
I have a trailer full of cultivator parts that will be going on ebay and if my friend can identify the parts you may need I will contact you before this next auction. albie
That would be great AlBie!!! Thank you. I have a few things I was thinking about selling or trading also. Might have to look into Ebay.
TBAR
IH2444 & 1949 Farmall Cub
-
- Cub Pro
- Posts: 28706
- Joined: Sun Feb 02, 2003 8:37 pm
- Zip Code: E1A7J3
- Skype Name: R.H. "Rudi" Saueracker, SSM
- Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger - Circle of Safety: Y
- Twitter ID: Rudi Saueracker, SSM
- Location: NB Dieppe, Canada
TBar:
Check the Cub Manual Server.
The Owner's Manual and the Part's Manuals are there for the two cultivators for the Cub, the 144 and the 252. That should help you identify what you have and what you do not have. Will also make a great point of reference when you are talking to Albie about the parts you are missing. That way he can have a look at the correct part# and let you know ifn he has one or not.
Hope this helps.
Check the Cub Manual Server.
The Owner's Manual and the Part's Manuals are there for the two cultivators for the Cub, the 144 and the 252. That should help you identify what you have and what you do not have. Will also make a great point of reference when you are talking to Albie about the parts you are missing. That way he can have a look at the correct part# and let you know ifn he has one or not.
Hope this helps.
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship
-
- 10+ Years
- Posts: 52
- Joined: Mon Jun 28, 2004 8:15 am
- Location: Texas
-
- Cub Pro
- Posts: 72
- Joined: Thu May 29, 2003 8:39 am
- Location: Pennsylvania
-
- Team Cub
- Posts: 17279
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
Tbar,
You are missing a "standard or "spring trip". The word "gang" usually refers to the entire unit that makes up one side of the front or rear. Part 1694BA is the right number for the clamp. The spring trips used on the Cub came in 2 lengths. Over all, not including the bolt-on sweep is either 11 1/4 or 12 3/4 inches. The rears should be the long ones, but you probably should check your other rear trip and match it. Part 511985R1 is the bracket in the middle of the trip so it will be the same on either length.
By the way, I notice your front section only has 4 points. That is probably all it ever had. But depending on what types of sweeps or shovels you decide to use, you might want to add one more on each side. Just a thought.
You are missing a "standard or "spring trip". The word "gang" usually refers to the entire unit that makes up one side of the front or rear. Part 1694BA is the right number for the clamp. The spring trips used on the Cub came in 2 lengths. Over all, not including the bolt-on sweep is either 11 1/4 or 12 3/4 inches. The rears should be the long ones, but you probably should check your other rear trip and match it. Part 511985R1 is the bracket in the middle of the trip so it will be the same on either length.
By the way, I notice your front section only has 4 points. That is probably all it ever had. But depending on what types of sweeps or shovels you decide to use, you might want to add one more on each side. Just a thought.
-
- 10+ Years
- Posts: 52
- Joined: Mon Jun 28, 2004 8:15 am
- Location: Texas
Thanks Jim,
I took the numbers off the other rear standard.
http://community.webshots.com/photo/241 ... 2253SjFlIo
I didn't think to measure the spring. Didn't know there was a difference. I am hoping to buy the whole assembly that bolts to the tool bar and another one for the front is probably a good idea. I seem to have plenty of sweeps of different sizes.
TBAR
I took the numbers off the other rear standard.
http://community.webshots.com/photo/241 ... 2253SjFlIo
I didn't think to measure the spring. Didn't know there was a difference. I am hoping to buy the whole assembly that bolts to the tool bar and another one for the front is probably a good idea. I seem to have plenty of sweeps of different sizes.
TBAR
IH2444 & 1949 Farmall Cub
-
- Similar Topics
- Replies
- Views
- Last post
-
- 2
- 246
-
by Barnyard
Sat Oct 14, 2023 4:24 pm
-
- 3
- 185
-
by NJ Farmer
Wed Jul 28, 2021 8:48 am
-
- 5
- 264
-
by AHS
Sat Aug 21, 2021 6:36 pm
-
-
Can't find the missing shifter fork Attachment(s)
by Gkiesel » Sat Jun 18, 2022 9:59 am » in Farmall Cub - 3
- 175
-
by Glen
Sat Jun 18, 2022 6:12 pm
-
-
- 10
- 455
-
by Crimson Tim
Sat Dec 11, 2021 12:29 am
Who is online
Users browsing this forum: No registered users and 3 guests