This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
NOISE
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
NOISE
Some kind of beeping noise coming from the truck, guess I better go check it out.
If you are not part of the solution,
you are part of the problem!!!
you are part of the problem!!!
-
- Team Cub Guide
- Posts: 3544
- Joined: Sun Feb 02, 2003 6:30 pm
- Zip Code: 38658
- eBay ID: Cub-Bud
- Tractors Owned: Four FCUBs, one IH Lo-Boy, one B Farmall, two Cadets, and a John Deere B.
- Circle of Safety: Y
- Location: MS, Pope
-
- 10+ Years
- Posts: 481
- Joined: Mon Feb 03, 2003 6:32 pm
- Location: Long Island,New York
-
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
Turned out to be the cub locator I finished wiring yesterdy. It had picked up on a cub in N.E. Arkansas. Called my cousin and we headed out. Turned out to be a wasted run. Seller wanted $850, and at first glance it looked good. Was a 55 with decent sheet metal and good grill. However when I started getting serious I was disapointed. Steering wheel had almost 3/4 round of play (bottom shaft moving up and down about 1/2 inch), and was apparently from a much older tractor. Radaitor neck mashed down as well as gastank slightly mushroomed, and seat replaced with lawnmover type, looks to have been rolled over at sometime. Pulled dipstick, and oil was milky. Pulled filter drain plug and a little antifreeze drained out. Since there are no oil passages to the head in a cub the block is probably cracked. Rims were good, but tires deteriorated (rears appear to be recaps that are pealing off. I offered $400, and he said no , so I thanked him and left. If anyone wants more info on it contact me off list
If you are not part of the solution,
you are part of the problem!!!
you are part of the problem!!!
-
- 10+ Years
- Posts: 876
- Joined: Sun Feb 02, 2003 11:19 pm
-
- Team Cub Mentor
- Posts: 24144
- Joined: Sun Feb 02, 2003 12:50 pm
- Zip Code: 43113
- Circle of Safety: Y
- Location: OH, Circleville
You better turn the gain up on that thing John! It'll home in on higher quality cubs. Oh yeah, turn off your cell phone - it interferes with the dynamic quadra-balanced framulator.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
-
- Cub Pro
- Posts: 2809
- Joined: Sun Feb 02, 2003 2:31 am
- Zip Code: 00000
- Location: Puyallup, WA.
-
- Similar Topics
- Replies
- Views
- Last post
-
- 3
- 116
-
by JimCub48
Tue Jun 06, 2023 9:41 am
-
- 18
- 485
-
by Waif
Mon Sep 06, 2021 12:13 pm
-
-
Noise near shifter when in gear Attachment(s)
by us600351 » Sat Dec 25, 2021 10:36 am » in Farmall Cub - 20
- 984
-
by Bob McCarty
Wed Feb 23, 2022 10:08 am
-
-
- 6
- 461
-
by Don McCombs
Sat Jan 13, 2024 10:38 pm
-
- 23
- 1359
-
by Mahoman
Mon Sep 20, 2021 10:36 am
Who is online
Users browsing this forum: No registered users and 2 guests