dose any one have a pic where the hold down clips for the hand crank go'shand crank
Moderator: Team Cub
17 posts
• Page 1 of 2 • 1, 2
hand crank
by crazyjoe » Sat Oct 13, 2012 9:04 am
hi dose any one have a pic where the hold down clips for the hand crank go's
dose any one have a pic where the hold down clips for the hand crank go's- crazyjoe
- Cub Star
- Posts: 57
- Joined: Sun Dec 11, 2011 8:21 pm
- Location: RHODE ISLAND
- Zip Code: 02835
- eBay ID: crazyjoe1078
- Tractors Owned: 56 cub with fast hitch
- Circle of Safety: Y
Re: hand crank
by cubguy47 » Sat Oct 13, 2012 9:11 am
See picture:
- Attachments
-
I have been collecting, buying, and selling Farmall Cub tractors, implements, and parts for nearly 11 years.
-
cubguy47 - 501 Club
- Posts: 2198
- Joined: Fri Dec 03, 2004 3:17 pm
- Location: Staunton, IL
- Zip Code: 62088
- eBay ID: cubguy47
- Tractors Owned: More Cubs, implements, and parts than I care to count!
- Circle of Safety: Y
Re: hand crank
by cubguy47 » Sat Oct 13, 2012 9:13 am
There are two 10-32 threaded holes in your floor pan, they may have broken screws in them already so you may need to drill them out and retap, the screw length will be 1/4"
I have been collecting, buying, and selling Farmall Cub tractors, implements, and parts for nearly 11 years.
-
cubguy47 - 501 Club
- Posts: 2198
- Joined: Fri Dec 03, 2004 3:17 pm
- Location: Staunton, IL
- Zip Code: 62088
- eBay ID: cubguy47
- Tractors Owned: More Cubs, implements, and parts than I care to count!
- Circle of Safety: Y
Re: hand crank
by crazyjoe » Sat Oct 13, 2012 9:15 am
thanks GUY what a big help everyone on the forum is
- crazyjoe
- Cub Star
- Posts: 57
- Joined: Sun Dec 11, 2011 8:21 pm
- Location: RHODE ISLAND
- Zip Code: 02835
- eBay ID: crazyjoe1078
- Tractors Owned: 56 cub with fast hitch
- Circle of Safety: Y
Re: hand crank
by frederick » Sat Oct 13, 2012 11:41 am
non-prototypical...velcro
I've fixed electrical problems with a hammer
-
frederick - Cub Star
- Posts: 115
- Joined: Wed Aug 11, 2010 12:19 am
- Location: san jose, california
- Zip Code: 95125
- Tractors Owned: 1951 cub hi-crop
Re: hand crank
by Buzzard Wing » Mon Oct 15, 2012 5:54 pm
BTW Joe, TM sells the pieces:
http://www.tmtractor.com/new/se/864fp.htm
http://www.tmtractor.com/new/se/864fp.htm
1971 Cub (Rufus) 1950 Cub (Cathy) 1965 Lo Boy Fast Hitch (Nameless III) 1970 Cub 1000 Loader & Fast Hitch (Lee)
-
Buzzard Wing - Cub Pro
- Posts: 9585
- Joined: Mon Aug 09, 2004 10:14 pm
- Location: RI, Newport
- Zip Code: 02840
Re: hand crank
by Steve Woods » Tue Oct 16, 2012 9:36 am
I'd like to order some of those clips from TM for my Cub but, first, where are these battery cables supposed to go? Under the floor board?
- Steve Woods
- Cub Star
- Posts: 139
- Joined: Wed Jun 15, 2011 9:00 am
- Zip Code: 34705
- Circle of Safety: Y
Re: hand crank
by Denny Clayton » Tue Oct 16, 2012 9:40 am
Steve Woods wrote:I'd like to order some of those clips from TM for my Cub but, first, where are these battery cables supposed to go? Under the floor board?
Yes.
'61 Lo-Boy
'60 FH Lo-Boy
'60 Lo-Boy
'57 FH Cub "Rusty"
'56 FH Cub
(2) '48 Cubs
'75 IH 140 w/1000 loader
C-3 mower, FH Woods 42F, 22 sickle (2), 54A blade, L-54 blade, 194 plow, FH L-38 disk, FH LB disk, 144 cultivators, FH platform carrier
'60 FH Lo-Boy
'60 Lo-Boy
'57 FH Cub "Rusty"
'56 FH Cub
(2) '48 Cubs
'75 IH 140 w/1000 loader
C-3 mower, FH Woods 42F, 22 sickle (2), 54A blade, L-54 blade, 194 plow, FH L-38 disk, FH LB disk, 144 cultivators, FH platform carrier
-
Denny Clayton - 501 Club
- Posts: 3211
- Joined: Wed Feb 05, 2003 1:18 pm
- Location: OH, Sidney
- Zip Code: 45365
- Tractors Owned: Home to "Rusty", the 2007 and 2009 Cub Tug Champion.
- Circle of Safety: Y
Re: hand crank
by Barnyard » Tue Oct 16, 2012 9:53 am
Cable routed from battery to under platform
Photo by Barnyard
Photo by Bigdog
Photo by Bigdog
Photo by Bigdog
I don't believe in taking the bull by the horns. I took a goat by the horns once and that was enough excitement for me.
Barnyard Bash CubFest May 31 - June 1, 2013
Click here for info.
-
Barnyard - Team Cub
- Posts: 15745
- Joined: Tue Aug 07, 2007 3:39 pm
- Location: OH, New Haven (Hamilton County)
- Zip Code: 45030
- Tractors Owned: At This Time
32 Farmall Cubs (Round Hood)
1 Farmall Cub (Square Hood)
2 IH Cubs 9Square Hood
4 Lo-Boys (Round Hood)
1 Lo-Boy (Square Hood)
2 Farmall 404's
1 Farmall H
1 Ferguson 20
1 Cub Cadet 125
1 Kubota B-7100 - Circle of Safety: Y
Re: hand crank
by Jim Becker » Tue Oct 16, 2012 10:31 am
This portion of the battery cable and rear light harness, by design, should run along the edge of the instrument panel and pass behind the clutch stop peg. A clip should attach to the open hole in the panel. The clip holds the cables in place and provides some abrasion protection. Here is a picture of the clip. Routing the cable forward of the peg does a pretty good job of keeping it out of harms way without the clip.
Photo by Bigdog
Photo from TM Tractor Parts
Photo by Bigdog
Photo from TM Tractor Parts
-
Jim Becker - Team Cub
- Posts: 11253
- Joined: Sun Feb 02, 2003 3:14 pm
- Location: TX
- Zip Code: 75048
- Circle of Safety: Y
Re: hand crank
by Barnyard » Tue Oct 16, 2012 11:15 am
Here is what Jim is referring to.
Here it is with the clutch pedal held down for clarity.
Here it is with the clutch pedal held down for clarity.
I don't believe in taking the bull by the horns. I took a goat by the horns once and that was enough excitement for me.
Barnyard Bash CubFest May 31 - June 1, 2013
Click here for info.
-
Barnyard - Team Cub
- Posts: 15745
- Joined: Tue Aug 07, 2007 3:39 pm
- Location: OH, New Haven (Hamilton County)
- Zip Code: 45030
- Tractors Owned: At This Time
32 Farmall Cubs (Round Hood)
1 Farmall Cub (Square Hood)
2 IH Cubs 9Square Hood
4 Lo-Boys (Round Hood)
1 Lo-Boy (Square Hood)
2 Farmall 404's
1 Farmall H
1 Ferguson 20
1 Cub Cadet 125
1 Kubota B-7100 - Circle of Safety: Y
Re: hand crank
by Steve Woods » Tue Oct 16, 2012 11:35 am
I ordered a couple of the hand crank clips from TM while ago but I can't find those battery cable loopety clips in their catalog. They weren't shown with the battery cable stuff anyway?
- Steve Woods
- Cub Star
- Posts: 139
- Joined: Wed Jun 15, 2011 9:00 am
- Zip Code: 34705
- Circle of Safety: Y
Re: hand crank
by Barnyard » Tue Oct 16, 2012 12:00 pm
Steve Woods wrote:I ordered a couple of the hand crank clips from TM while ago but I can't find those battery cable loopety clips in their catalog. They weren't shown with the battery cable stuff anyway?
TM hasn't carried them for a while. Stiener has them for about 10 bucks. If you aren't going for originality you can go to a hardware store or possibly a parts house and get one of these.
I don't believe in taking the bull by the horns. I took a goat by the horns once and that was enough excitement for me.
Barnyard Bash CubFest May 31 - June 1, 2013
Click here for info.
-
Barnyard - Team Cub
- Posts: 15745
- Joined: Tue Aug 07, 2007 3:39 pm
- Location: OH, New Haven (Hamilton County)
- Zip Code: 45030
- Tractors Owned: At This Time
32 Farmall Cubs (Round Hood)
1 Farmall Cub (Square Hood)
2 IH Cubs 9Square Hood
4 Lo-Boys (Round Hood)
1 Lo-Boy (Square Hood)
2 Farmall 404's
1 Farmall H
1 Ferguson 20
1 Cub Cadet 125
1 Kubota B-7100 - Circle of Safety: Y
Re: hand crank
by mrdibs » Tue Oct 16, 2012 2:23 pm
Crap! I have the wiring on top too because that's where it was when I started. Never occurred to me that those clips were for the crank!
- mrdibs
- Cub Star
- Posts: 98
- Joined: Tue Feb 21, 2012 11:02 pm
- Zip Code: 19520
- Tractors Owned: 1948 Farmall Cub
2007 Cub Cadet
17 posts
• Page 1 of 2 • 1, 2
Who is online
Users browsing this forum: Brendan In NC, Eugene, JLollis and 6 guests
|
|