I have a knocking sound when in second gear. can anyone tell me what's wrong. and how to repair it.
Thanks
Dave
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
second gear
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- Cub Pro
- Posts: 28706
- Joined: Sun Feb 02, 2003 8:37 pm
- Zip Code: E1A7J3
- Skype Name: R.H. "Rudi" Saueracker, SSM
- Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger - Circle of Safety: Y
- Twitter ID: Rudi Saueracker, SSM
- Location: NB Dieppe, Canada
Re: second gear
Dave:
You will have to take the shifter tower off of the tranny. 1st thing is to check if the forks are loose, if so, tighten them up. You may also have a chipped gear .. then you will have to split the tranny and replace the gear. The Service Manual will have the procedure for that. Also these articles may be of help and of course for your Implement Mounting Hole problem:
You will have to take the shifter tower off of the tranny. 1st thing is to check if the forks are loose, if so, tighten them up. You may also have a chipped gear .. then you will have to split the tranny and replace the gear. The Service Manual will have the procedure for that. Also these articles may be of help and of course for your Implement Mounting Hole problem:
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship
-
- 10+ Years
Re: second gear
Do some further investigation as Rudi mentioned. I would suggest jacking up the rear of the Cub, remove the rear wheels, and try to narrow down the source of the noise and exactly what may be causing it.
-
- Team Cub Mentor
- Posts: 17524
- Joined: Mon Feb 03, 2003 6:45 am
- Zip Code: 21550
- Tractors Owned: "1950 Something" Farmall Cub
1957 Farmall Cub w/FH
1977 International Cub w/FH
1978 International Cub
1948 Farmall Super A - Circle of Safety: Y
- Location: MD, Deep Creek Lake
Re: second gear
Check all your wheel center and rim bolts, to make sure none are loose.
-
- 10+ Years
- Posts: 4
- Joined: Fri Nov 02, 2012 12:17 am
- Zip Code: 16441
Re: second gear
Thanks rudi, don and cubguy. I will try your suggestions. thankyou again.
Dave.
Dave.
-
- Similar Topics
- Replies
- Views
- Last post
-
- 20
- 1287
-
by Clemsonfor
Wed Mar 02, 2022 6:00 pm
-
- 10
- 461
-
by AndrewSpencer
Wed May 18, 2022 7:07 pm
-
- 31
- 1406
-
by Glen
Sat Aug 13, 2022 5:07 pm
-
- 11
- 367
-
by Schu
Mon Nov 14, 2022 10:00 pm
-
- 3
- 152
-
by Jim Becker
Fri Jul 28, 2023 11:44 am
Who is online
Users browsing this forum: No registered users and 4 guests