The IH part 528810R91 includes the flange. That may make it difficult to find an interchange as a proper replacement for that part number would need the flange. However, if you reuse the flange, National 474250 has been reported as a direct replacement. You can see it and the dimensions here:
https://www.motionindustries.com/produc ... u=01317702
Make sure you get install the seal and flange with the right orientation. The flange keeps the shaft from sliding forward.
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Transmission input seal
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
Jim Becker
- Team Cub
- Posts: 17280
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
-
- Similar Topics
- Replies
- Views
- Last post
-
-
Rear input shaft bearing shields-- question Attachment(s)
by Bob McCarty » Wed Jan 03, 2024 7:43 pm » in Farmall Cub - 2
- 712
-
by Bob McCarty
Thu Jan 04, 2024 6:21 pm
-
-
- 3
- 330
-
by tenn terry t
Sun May 23, 2021 9:38 pm
-
- 3
- 146
-
by Barnyard
Tue Jun 27, 2023 5:48 pm
-
- 1
- 125
-
by Glen
Mon Jul 25, 2022 6:30 pm
-
- 5
- 226
-
by Glen
Mon Aug 21, 2023 5:40 pm
Who is online
Users browsing this forum: No registered users and 3 guests
