Farmall Cub Forum -- Questions and answers to all of your Cub related issues.
Fri Dec 14, 2012 7:33 pm
Definitely replace! Looks like in the middle of the weld there is another crack again. My rule is if your pulling off something that has been repaired like a final, front bolster, front axle ect. REPLACE IT. Lol. It's not worth the time and new parts patching up junk. Put a good piece on it and KNOW it's fixed. Just my .02 cents... Looks like a good tractor and deserves good parts
Fri Dec 14, 2012 7:46 pm
Chris D wrote: Looks like in the middle of the weld there is another crack again.
That is because they didnt clean up the weld before painting. That is slag that is cracked...
Fri Dec 14, 2012 7:48 pm
Also, the two rear holes in the diff case have been drilled and tapped to the next size, Im assuming it either ripped the threads out when it broke, or the bolts broke off and they had to drill them out.
Fri Dec 14, 2012 7:57 pm
I will sell you a finial for $100 and give you a transmission case if you want to replace it
Boss
Fri Dec 14, 2012 8:34 pm
Boss Hog wrote:I will sell you a finial for $100 and give you a transmission case if you want to replace it
Boss
PM Sent
Fri Dec 14, 2012 11:19 pm
Boss Hog wrote:I will sell you a finial for $100 and give you a transmission case if you want to replace it
Boss
A year ago, I bought a "new" final from Boss, cleaned it up, replaced the seals and repainted it and swapped finals out at DSCF...sure was easier than messing around with the old one, and now I don't have to worry about it. THANKS BOSS!!
Sat Dec 15, 2012 1:32 pm
Thanks Boss!
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.