I have one ty rod end that is straight through with threads on the end. The other has a nut and bolt that you can loosen and pull out the inner.
Should I have the same on both ends or is it standard to have one of each?
Pictures are below of what mine look like.
http://www.tm-tractor.com/gst/a2852s.jpg
http://www.tm-tractor.com/gst/mvc_5299s.jpg
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
TY ROD ENDS
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- Cub Pro
- Posts: 7013
- Joined: Sun Feb 02, 2003 9:36 pm
- Zip Code: 43420
- Circle of Safety: Y
- Location: OHIO, Fremont
Kylev,
The first one was made for a non-adjustable axle and the second is for the optional adjustable axle. Which one is right depends on which axle you have, but they should be alike.
The first one was made for a non-adjustable axle and the second is for the optional adjustable axle. Which one is right depends on which axle you have, but they should be alike.
George Willer
http://gwill.net
The most affectionate creature in the world is a wet dog. Ambrose Bierce
http://gwill.net
The most affectionate creature in the world is a wet dog. Ambrose Bierce
-
- 10+ Years
- Posts: 190
- Joined: Wed Apr 06, 2005 6:26 am
-
- 10+ Years
- Posts: 382
- Joined: Sun Jun 13, 2004 10:18 am
- Location: Weatherford, Ok
-
- Similar Topics
- Replies
- Views
- Last post
-
- 4
- 248
-
by Jim Becker
Thu Oct 14, 2021 11:00 pm
-
-
Finally rebuilt the Touch Control, but it never ends Attachment(s)
by 4thGen » Sat May 14, 2022 1:56 pm » in Farmall Cub - 11
- 456
-
by 4thGen
Sat May 21, 2022 11:47 am
-
Who is online
Users browsing this forum: Dave Downs, dgrapes59 and 3 guests