Tue Mar 19, 2013 7:18 pm
I started rebuilding the touch control block(early style) on my dads cub. When I took back cover off things went sorts haywire and parts were falling out on to bench. Is there a diagram of in what order the parts go back in? He bought a parts manual a long time ago but it's not printed clearly enough for me to tell what order parts go into the block.
Wed Mar 20, 2013 8:02 am
I looked at the instructions in the how to section and these blocks are a bit different. I'll print off what Rudi put up. That should help a lot. Thanks.
Thu Mar 21, 2013 1:58 pm
There are 2 different ones, and you need to order the kit by the number cast into the side. Or on some it us under the overhang on the front of the block.
Sat Mar 23, 2013 10:16 pm
Thanks for the help. The rebuild went great after looking here for the answer. Put it back on the cub today and it works great and no more leaking..............yet!
Sun Mar 24, 2013 2:45 pm
on the successful rebuild. Glad we were able to be of some help. Keep us posted
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.