This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
hydraulics?
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 30
- Joined: Sun Apr 24, 2005 2:49 pm
- Location: monroe michigan
hydraulics?
On my cub, if I check and add oil with the touch control lever all the way to the back. It leaks oil from the oil level pipe plug. When I go to take the plug out the oil comes out under some pressure and full of air bubbles. Then, The hydraulics work realy slow after that like they're low on oil. And they are noisy either way. Kind of screechy sounding. Am I doing something wrong here or is something wrong inside? They work well and pick up a load and hold it fine. Just noisy and wierd on the oil level.
-
- Cub Pro
- Posts: 2809
- Joined: Sun Feb 02, 2003 2:31 am
- Zip Code: 00000
- Location: Puyallup, WA.
I sounds like it has a lot of air trapped in it. Try leaving the fill plug out and run it through 10 complete up&down cycles at engine idle speed. That should purge the system of air. If it doesn`t then you have a loose fitting/s or some other reason as to why air is getting into the system.
Then came Bronson
-
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
Check and add oil with the lever to the front so the cylinder is retracted. With the lever to the rear you will have it overfilled. Also then follow Johnbron's instructions about purginr the air. there is a manual on Rudi's server under the blue Ribbon manual section.
http://www.cleancomputes.com/Cub/Blue%2 ... index.html
http://www.cleancomputes.com/Cub/Blue%2 ... index.html
If you are not part of the solution,
you are part of the problem!!!
you are part of the problem!!!
-
- Team Cub
- Posts: 17279
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
-
- 10+ Years
- Posts: 30
- Joined: Sun Apr 24, 2005 2:49 pm
- Location: monroe michigan
I changed the fluid again last night after work. Still shot oil out when I took out the check level plug. I changed the oil when I first got it a month or so ago. I swear I thought the online manuals said to add to the full level with the control all the way to the rear. I did that again and now its working pretty quiet and nice. I'll have to go read again about which point to add the oil.
-
- Similar Topics
- Replies
- Views
- Last post
-
- 8
- 225
-
by Josh_boro
Mon Aug 07, 2023 9:06 pm
-
- 14
- 637
-
by Jim Becker
Tue May 09, 2023 12:06 pm
-
- 8
- 339
-
by Dale Finch
Sun Jul 18, 2021 12:59 pm
-
- 30
- 1137
-
by LyleDoe
Sun Mar 13, 2022 10:58 am
-
- 2
- 162
-
by tst
Wed May 12, 2021 10:39 pm
Who is online
Users browsing this forum: No registered users and 1 guest