This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
DIY 3 Point Hitch
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 5+ Years
- Posts: 32
- Joined: Fri Feb 13, 2015 10:30 am
- Zip Code: 39553
- Tractors Owned: 1953 Farmall Cub
[url=http://www.farmallcub.com/phpBB2/viewtopic.php?f=122&t=87548]1953 Farmall Cub Restoration[/URL] - Location: Gautier MS
Re: DIY 3 Point Hitch
I have fabricated a couple of 3 point hitches for my cub. The first one utilized the mule drive but I found that the metal was too thin to hold up to the abuse I put it through. The second one was made with 1/4" material. I love my 3 point hitch and use it all the time. I'm sure you'll enjoy yours as well. Makes the little tractor so much more useful!
-
- 5+ Years
- Posts: 519
- Joined: Sun Oct 22, 2017 4:54 pm
- Zip Code: 38330
- Tractors Owned: 1951 Cub Lil Red
- Location: Dyer, TN
Re: DIY 3 Point Hitch
I'm using 2 1/2" 1/4" thick angle welded up with my ugly welds for the brackets. For the mule drive crossmember, I've got probably 40ft of 1 1/2" square tubing that's 3/16" thick and about as much 3/16" angle. I'm going to wrap the square tubing for the cross member with the angle to double it all up using more ugly welds.
-
- 5+ Years
- Posts: 605
- Joined: Sat Oct 22, 2016 1:04 pm
- Zip Code: 72454
- Tractors Owned: 1948 Cub "Trusty"
1948 Cub "Rusty"
1948 Cub "Bob"
1948 Cub "Sallie" (wife's tractor)
1965 IH Cub "Annie"
1943 Farmall H
1953 Farmall Super M (granddad's tractor)
Re: DIY 3 Point Hitch
I like it! Built off the mule drive?
1948 Cub "Trusty"
1948 Cub "Rusty" mower tractor, trimmed ear dash
1948 Cub "Bob"
1948 Cub "Sallie"
1965 IH Cub "Annie" mower tractor,
1943 Farmall H,
1953 Farmall Super M
1948 Cub "Rusty" mower tractor, trimmed ear dash
1948 Cub "Bob"
1948 Cub "Sallie"
1965 IH Cub "Annie" mower tractor,
1943 Farmall H,
1953 Farmall Super M
-
- 5+ Years
- Posts: 519
- Joined: Sun Oct 22, 2017 4:54 pm
- Zip Code: 38330
- Tractors Owned: 1951 Cub Lil Red
- Location: Dyer, TN
Re: DIY 3 Point Hitch
Got the brackets bolted up to the finals for a trail fit. I'm try to decide whether to put the crossmember on top part of the brackets or under it. The lower link pins will definitely be low. If the crossmember is on the upper portion, the "mast" for the top link won't have to be as high which should help keep it from wanting to bend as much.
-
- 5+ Years
- Posts: 31
- Joined: Tue Mar 27, 2018 7:55 pm
- Zip Code: 21778
- Tractors Owned: 49 farmall cub
Cub cadet 104
Re: DIY 3 Point Hitch
Sorry to bring up a super old post but is there any measurements of this fine work
-
- Similar Topics
- Replies
- Views
- Last post
-
-
Mounting bolts for 3 point hitch Attachment(s)
by Workinprogress » Mon Jan 08, 2024 6:10 pm » in Farmall Cub - 13
- 1210
-
by Workinprogress
Tue Jan 30, 2024 7:53 pm
-
-
-
1-point Fast Hitch for Cub - Installation Attachment(s)
by lakesurfer » Sun Mar 03, 2024 1:56 pm » in Farmall Cub - 19
- 608
-
by staninlowerAL
Tue Apr 02, 2024 4:44 am
-
-
- 8
- 681
-
by SONNY
Sun Dec 05, 2021 1:04 pm
-
- 3
- 221
-
by RJB340
Tue Jun 01, 2021 12:22 pm
-
- 2
- 242
-
by Dave Downs
Mon Aug 09, 2021 6:30 pm
Who is online
Users browsing this forum: staninlowerAL and 8 guests