This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Front wheel bearings
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 6152
- Joined: Mon Mar 19, 2012 7:33 pm
- Zip Code: 00000
- Tractors Owned: 1956 Farmall Cub with Fast Hitch, F-11 plow, Disc, Cultivator, Cub-22 mower
- Circle of Safety: Y
- Location: Wa.
Front wheel bearings
Hi,
I just wanted to ask if everyone has been greasing their front wheel bearings. The Cub owner's manual says "After every 6 months or every 500 hours of operation, whichever occurs first, remove, clean, and grease the front wheel bearings." That's a lot of greasing. I doubt many people do it that often. But I wanted to put some info here, because they do need some greasing, if they get dry it will probably ruin your bearings.
I just wanted to ask if everyone has been greasing their front wheel bearings. The Cub owner's manual says "After every 6 months or every 500 hours of operation, whichever occurs first, remove, clean, and grease the front wheel bearings." That's a lot of greasing. I doubt many people do it that often. But I wanted to put some info here, because they do need some greasing, if they get dry it will probably ruin your bearings.
-
- 10+ Years
- Posts: 1501
- Joined: Thu Oct 18, 2012 3:23 pm
- Zip Code: 13143
- Tractors Owned: 1957 Cub Low Boy w/ FH Mott Flail Mower
1953 Cub w/ sprayer and 54A blade (Chompers)
1954 Cub w/fast hitch (Ira)
1948 Cub ( Papa Paul)with Henderson loader..
1951 Mutt mix Cub (BattleAx
1950 Farmall Cub (basket case demo)
Cub parts tractor
2019 " KuB"ota 2601 loader and roto tiller
1951 Ferguson TEA 20 (parts)( Uncle Rusty)
F/H Disc Harrow for cub L-38
C-22 Sickle Bar Mower
IH C2 and C3 mower
Universal tool attachment with disc hillers..Rear cultivators (various tips
York Rake for Cub home made
Single bottom Plow for Cub F194
Gravely 5660 12 hp/ w snoblower.rototiller,bush hog - Circle of Safety: Y
Re: Front wheel bearings
Thanks for the reminder...I grease my tractors usually every other usage...Always forget about the wheel bearings.... Suppose to rain today...Good chance to do them....Reverse thread if I recall .... Dave
In Memory of 58,286
-
- 10+ Years
- Posts: 1475
- Joined: Fri Mar 15, 2013 9:46 pm
- Zip Code: 12009
- eBay ID: kepara
- Tractors Owned: 1929 Farmall Regular #T111250 (Original Owner)
1942 Farmall M #55654
1948 Farmall Cub #21005
1955 Farmall Cub #190769
1961 Cub Cadet #16509
1975 Cub Cadet 1250H
197x IH 990 Haybine
1994 JD 5320 Diesel
Attachments: Woods 42F Fast Hitch, L38 Disc Fast Hitch, F11 Plow Fast Hitch, Land Plow, Snow Plow, Grader Blade, Planter w/Fertilizer, Cultivators, Hilling Disks, Sickle Bar Mower(2), IH 7' Sickle Bar Mower, Flail Mower and 5' International Belly Mower. - Circle of Safety: Y
- Location: Altamont, NY
Re: Front wheel bearings
Tractor wheel bearings like trailer wheel bearings sit often, never getting warm enough to drive the condensation out. My experience with both types of bearings indicates the back bearing grease can become water / moisture laden.
I've seen this in my RV axles and most recently on Rex ''48 where the one inner bearing was greasy but still rusted. This can happen even with the seals being in perfect condition. The hub warms and cools with the weather, sucking moisture in. Hence the 6 months or 500 hours.
My narrative is complete
I've seen this in my RV axles and most recently on Rex ''48 where the one inner bearing was greasy but still rusted. This can happen even with the seals being in perfect condition. The hub warms and cools with the weather, sucking moisture in. Hence the 6 months or 500 hours.
My narrative is complete
Ken
Pleasant View Farm - Est. 1799
1930 Farmall Restoration Project
My Restoration Project - FCUB '48 - Rex
Pleasant View Farm - Est. 1799
1930 Farmall Restoration Project
My Restoration Project - FCUB '48 - Rex
-
- Cub Pro
- Posts: 10540
- Joined: Mon Aug 09, 2004 10:14 pm
- Zip Code: 02840
- Location: RI, Newport
Re: Front wheel bearings
The Long Stripe manual dropped the 'routine' maintenance of the front wheel bearings. I would surely recommend that it be done as soon as you bring a Cub home. If the seals are in decent shape and you don't leave it in a deep puddle you should be set for years..... but you MUST do it once.
I have had two that were very rusty and had to replace the whole 'kit'. If I just ran them, it would eventually ruin something....
Not a hard job, the instructions are in the operators manual (except the Long Stripe manual). The bearings are pretty stout, but water will ruin them eventually. If maintained they will last as long as the tractor.
I have had two that were very rusty and had to replace the whole 'kit'. If I just ran them, it would eventually ruin something....
Not a hard job, the instructions are in the operators manual (except the Long Stripe manual). The bearings are pretty stout, but water will ruin them eventually. If maintained they will last as long as the tractor.
1971 Cub (Rufus) 1950 Cub (Cathy) 1965 Lo Boy Fast Hitch (Nameless III) 1970 Cub 1000 Loader & Fast Hitch (Lee)
-
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
Re: Front wheel bearings
My cubs have grease fittings on the front hubs and I give them a couple shots every so often, depending on the use. On ones without the fittings, as a shortcut you can remove the cap over the end and fill with grease then screw it back in.
If you are not part of the solution,
you are part of the problem!!!
you are part of the problem!!!
-
- 10+ Years
- Posts: 414
- Joined: Sun Jul 14, 2013 11:24 pm
- Zip Code: 04730
- Tractors Owned: 1950 Cub...so far
- Location: Houlton, Maine
Re: Front wheel bearings
John *.?-!.* cub owner wrote:My cubs have grease fittings on the front hubs and I give them a couple shots every so often, depending on the use. On ones without the fittings, as a shortcut you can remove the cap over the end and fill with grease then screw it back in.
I was hoping someone would say that. That's what I did.
-
- Cub Pro
- Posts: 10290
- Joined: Mon Oct 24, 2005 8:35 pm
- Zip Code: 23962
- eBay ID: dmb2613
- Circle of Safety: Y
- Location: VA. Randolph
Re: Front wheel bearings
When you do grease them use plenty of grease pack the hub full , with the quality of today's grease it will keep most of the water out Will last a good amount of time. But I will reemphasize what Larry [ Buzzard wing ] said DO IT WHEN YOU FIRST GET YOUR CUB!!! It will save you $$$$$ most of the time all you will have to do is clean and pack em. Do not take the inside bearing off unless you have to, the seals cost big bucks.
Boss
Boss
IN GOD WE TRUST
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
-
- Cub Pro
- Posts: 10540
- Joined: Mon Aug 09, 2004 10:14 pm
- Zip Code: 02840
- Location: RI, Newport
Re: Front wheel bearings
Yep, full of grease and there is no room for water. In higher speed stuff where heat is a factor (mower spindle, for example) too much grease will expand and push past the seals. But even in my 'high speed run' back and forth to the fort, I doubt much heat is generated.
I was really pleased when I repacked the 49 Cub's front bearings, they were PERFECT. Never seen tapered roller bearings where there was no cage.... really helps to keep a Cub under cover.
I was really pleased when I repacked the 49 Cub's front bearings, they were PERFECT. Never seen tapered roller bearings where there was no cage.... really helps to keep a Cub under cover.
1971 Cub (Rufus) 1950 Cub (Cathy) 1965 Lo Boy Fast Hitch (Nameless III) 1970 Cub 1000 Loader & Fast Hitch (Lee)
-
- 10+ Years
- Posts: 203
- Joined: Sat Aug 17, 2013 8:36 pm
- Zip Code: 97526
- Tractors Owned: 1948 FCub
1953 FCub - Location: Oregon
Re: Front wheel bearings
John *.?-!.* cub owner wrote:My cubs have grease fittings on the front hubs and I give them a couple shots every so often, depending on the use. On ones without the fittings, as a shortcut you can remove the cap over the end and fill with grease then screw it back in.
I don't think I've every greased the bearings. I am going to try this short cut.
For the folks who do take their wheel off, which I am tempted to do, which shop tools do you use for this? I don't have a jack that can safely hold the tractor up without risk of falling over, unless I use some awkward big cinder blocks or something.
-
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
Re: Front wheel bearings
farmergiffIV wrote:John *.?-!.* cub owner wrote:My cubs have grease fittings on the front hubs and I give them a couple shots every so often, depending on the use. On ones without the fittings, as a shortcut you can remove the cap over the end and fill with grease then screw it back in.
I don't think I've every greased the bearings. I am going to try this short cut.
For the folks who do take their wheel off, which I am tempted to do, which shop tools do you use for this? I don't have a jack that can safely hold the tractor up without risk of falling over, unless I use some awkward big cinder blocks or something.
Just raise one wheel at a time if you do not have means to raise the entire front. Do NOT use actual cinder blocks, they will unexpectedly collapse into pieces.
If you are not part of the solution,
you are part of the problem!!!
you are part of the problem!!!
-
- 10+ Years
- Posts: 6152
- Joined: Mon Mar 19, 2012 7:33 pm
- Zip Code: 00000
- Tractors Owned: 1956 Farmall Cub with Fast Hitch, F-11 plow, Disc, Cultivator, Cub-22 mower
- Circle of Safety: Y
- Location: Wa.
Re: Front wheel bearings
Hi,
If you have never greased the bearings, I would recommend that you take the hubs off, one side at a time, and clean out the old grease, it can get old and hard. Then clean everything, and re-grease the bearings. Here is a page from the Cub owner's manual showing how.
The book says it's better to leave the inner bearing and seal on the shaft, like Boss said above.
They are usually hard to get off the shaft, a puller is usually needed.
I would use something like a small hydraulic jack, and some solid blocks under the front axle to set the jack on, to raise the front, one side at a time. It only has to raise the tire a little off the ground. Put the tractor in gear, lock the brakes on, and put wood blocks in front and behind the rear tires, against the tires, to keep it from rolling. Do the job on level ground if you can.
http://www.cleancomputes.com/Cub/Cub%20 ... age-16.jpg
If you have never greased the bearings, I would recommend that you take the hubs off, one side at a time, and clean out the old grease, it can get old and hard. Then clean everything, and re-grease the bearings. Here is a page from the Cub owner's manual showing how.
The book says it's better to leave the inner bearing and seal on the shaft, like Boss said above.
They are usually hard to get off the shaft, a puller is usually needed.
I would use something like a small hydraulic jack, and some solid blocks under the front axle to set the jack on, to raise the front, one side at a time. It only has to raise the tire a little off the ground. Put the tractor in gear, lock the brakes on, and put wood blocks in front and behind the rear tires, against the tires, to keep it from rolling. Do the job on level ground if you can.
http://www.cleancomputes.com/Cub/Cub%20 ... age-16.jpg
-
- 10+ Years
- Posts: 277
- Joined: Mon Jun 06, 2011 6:46 pm
- Zip Code: 99109
- Tractors Owned: 1954 Farmall Cub
2013 NH Workmaster 40 - Circle of Safety: Y
- Location: Chewelah, WA
Re: Front wheel bearings
I get nowhere near 500 hours on the Cub a year. But, I try and do them at least annually.
WaMoo - Dairy Farmer and U.S. Coast Guard (Retired)
Chewelah, WA
"I had rather be on my farm than be emperor of the world."
~George Washington
Chewelah, WA
"I had rather be on my farm than be emperor of the world."
~George Washington
-
- Team Cub
- Posts: 11862
- Joined: Tue May 25, 2004 8:02 pm
- Zip Code: 80501
- Tractors Owned: Cubs, MH Pony, Shaw, Allis G, 1934 Silver King, JD LA and LI, Gibson D, David Bradley Tri-Trac
- Circle of Safety: Y
- Location: CO, Longmont
Re: Front wheel bearings
WaMoo wrote:I get nowhere near 500 hours on the Cub a year. But, I try and do them at least annually.
But you probably think about your Cub at least that much....
Bob
"We don't need to think more,
we need to think differently."
-Albert Einstein
we need to think differently."
-Albert Einstein
-
- 10+ Years
- Posts: 203
- Joined: Sat Aug 17, 2013 8:36 pm
- Zip Code: 97526
- Tractors Owned: 1948 FCub
1953 FCub - Location: Oregon
Re: Front wheel bearings
I successfully cleaned out the bearings via the hub cab method today. It must have been the first time since 1948 since I've done that cuz the grease looked like watery oil. Not too much rust though and bearings looked alright...
-
- 5+ Years
- Posts: 140
- Joined: Sat Jan 16, 2016 11:47 am
- Zip Code: 03741
- Tractors Owned: 51 cub
Fast Hitch
Cub22 mower
193 plow
L54 plow
C2 mower
1945 Ford 2N with aftermarket loader - Circle of Safety: Y
- Location: Canaan NH
Re: Front wheel bearings
What does everybody do with that inner bearing? I don't have any experience with felt washers. Can I just use brake cleaner? How important is it to keep cleaner away from the washer? Then how do I repack it? I only know one way, so that won't work. Has anybody tried one of those needle applicators on a grease gun? Thanks
If nothing else, I'm good at being the bad example or a last resort
-
- Similar Topics
- Replies
- Views
- Last post
-
- 2
- 178
-
by tst
Mon Jun 28, 2021 9:16 am
-
- 3
- 161
-
by Dale Finch
Tue Jun 14, 2022 5:55 pm
-
- 3
- 182
-
by SamsFarm
Mon Mar 27, 2023 11:22 am
-
- 3
- 330
-
by tenn terry t
Sun May 23, 2021 9:38 pm
-
- 3
- 311
-
by Dale Finch
Sat Jan 22, 2022 8:33 am
Who is online
Users browsing this forum: Majestic-12 [Bot], Masmith and 8 guests