looking for

Fri Aug 16, 2013 6:31 pm

looking for a picture with measurements for a no 16 middlebuster chain hook thanks

Re: looking for

Fri Aug 16, 2013 8:20 pm

Is it No11 that you need?
http://www.cleancomputes.com/Cub/Cub%20 ... e%2002.jpg

Re: looking for

Fri Aug 16, 2013 8:28 pm

yes no 11 is the animal thanks

Re: looking for

Fri Aug 16, 2013 9:39 pm

Well, went out to take a photo, and I don't have that part either. On mine, the chain just goes through the pin (9). Sorry!!
So, make that two of us that need a pic and dimensions of the hook.

Re: looking for

Fri Aug 16, 2013 9:43 pm

Is it the same as a plow hook?

Re: looking for

Fri Aug 16, 2013 9:56 pm

Boss Hog wrote:Is it the same as a plow hook?

It's pretty close. The one in question has a loop on one end, and the chain hook on the other. I could probably make one pretty quick next time I'm up at Bobs. I've got a jig made for the 193 and 152 plow hooks, just need a torch and don't have one at my place.

Re: looking for

Fri Aug 16, 2013 10:27 pm

Here are a few pics of some of the hooks I've made, the one above shouldn't be too hard to make.
Image
Image

Re: looking for

Sat Aug 17, 2013 8:04 am

does anyone have an original?

Re: looking for

Sat Aug 17, 2013 5:11 pm

I've got another No16 Middlebuster in Florida. I'll be there for the Labor Day weekend and I'll see if that one has the original hook.

Re: looking for

Sat Aug 17, 2013 5:55 pm

Raymond, are you still making those plow (152)hooks? Would love to have one if reasonably priced.

Re: looking for

Sat Aug 17, 2013 7:16 pm

$30 sounds reasonable to me but you may starve selling them for that :D

Re: looking for

Mon Sep 02, 2013 4:16 pm

Well, struck out again. The one on Fla was connected the same way as the one in Colorado.