This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Transmission rattle
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 3
- Joined: Wed Sep 18, 2013 8:27 am
- Zip Code: 56093
Transmission rattle
Hello, I have a 49 Cub that has a horrible rattle sound in the transmission. When I bought the tractor and test drove it there was no "bad sounds" in any of the gears. I got home and changed all the oils and ouch here comes this ugly rattle. There is no rattle when it is running and in neutral. The rattle is not as bad in R or 1st and gets worse in 2nd and 3rd. 3rd sounds like air hammer on a bell. When in 3rd, I put my hand down on the lil hump on the leftside of the transmission and you can feel the rattle. I have split the tractor and lifted the rear end to spin the transmission. I removed items from the transmission until the sound disappeared. I believe the rattle to be caused by the rear idle gear. I have replaced the bushing for that gear and I also replaced the pinion bearings. The noisy is still there. Would replacing that idle gear be my answer? I have tried all the oil tricks without making a difference. Thanks for any help.
-
- 10+ Years
- Posts: 5234
- Joined: Mon Jan 26, 2004 10:53 am
- Zip Code: 28521
- Tractors Owned: Collector of Super As, Corn Pickers, and a buncha other junk. Even a Cub now and then...
- Circle of Safety: Y
- Location: NC, Jacksonville area
Re: Transmission rattle
May not be the same thing but mine will rattle sometimes when you go from reverse to second. I blame mine on a worn shifter, I think it is not coming all the way out of reverse so that the idler gear teeth are still barely making contact with their mate gear when it's in second. If I shift firmly back into reverse, and then firmly into second, it goes away. Long story short, look at your shifter for wear.
Al
Al
White Demo Super A Restoration Updates
Let us pray for farmers and all who prepare the soil for planting, that the seeds they sow may lead to a bountiful harvest.
Celebrating 75 years of the Super A: 1947-2022
Let us pray for farmers and all who prepare the soil for planting, that the seeds they sow may lead to a bountiful harvest.
Celebrating 75 years of the Super A: 1947-2022
-
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
Re: Transmission rattle
That type of noise is tough to diagnose without being there, but the first thing I would do is check the shifter forks for being bent or broken, allowing gears to rub. In addition, you could have a bad bearing on the pinion shaft that goes out the bottom of the transmission to the differential. That shaft as well as the reverse idler turns anytime the tractor is moving, no matter what gear, even just rolling in neutral. Wedge the front axle, and carefully raise both wheels off the ground and with the tractor in neutral try turning the wheels. Note, due to the differential you will have to turn both of them to spin the pinion shaft and reverse idler. Also check the sound if you only turn one wheel allowing the other one to free whee(will turn opposite way). if no noise doing this block the clutch down and try the same procedure in different gears.
If you are not part of the solution,
you are part of the problem!!!
you are part of the problem!!!
-
- 10+ Years
- Posts: 3
- Joined: Wed Sep 18, 2013 8:27 am
- Zip Code: 56093
Re: Transmission rattle
I did try the lifting and moving the rear tires. As I was doing this I removed a gear at a time until the noise went away. The only thing left in the transmission was all the pinion gears and this reverse idle gear. When I took the reverse idle gear out the noise was gone. I replaced the bushing in this gear and it still made the noise so I pulled the pinion and replaced those bearings thinking maybe there was just enough play to resonate a sound etc. The reverse gear (350848r1) is a straight cut gear and shows no wear. The reverse idle gear (350870r11) shows the typical abuse from 60 yrs of being jammed into reverse and seems a bit sloppy mesh with the other. They run together all the time so that is why the noise is there in all gears and gets worse when in 3rd.
-
- Cub Pro
- Posts: 7760
- Joined: Mon Jun 22, 2009 6:56 am
- Zip Code: 64070
- Tractors Owned: 1942 Farmall AV, serial #87025
1947 Farmall Circle Cub, serial #2116
1948 Farmall Cub, serial #46066 - Circle of Safety: Y
- Location: Lone Jack, MO
Re: Transmission rattle
BTW: Welcome to the forum!!
As you've already experienced, this is a great place for finding answers to your Cub questions.
As you've already experienced, this is a great place for finding answers to your Cub questions.
-
- 10+ Years
- Posts: 3
- Joined: Wed Sep 18, 2013 8:27 am
- Zip Code: 56093
Re: Transmission rattle
Thank you. This place is awesome.
-
- Cub Pro
- Posts: 28706
- Joined: Sun Feb 02, 2003 8:37 pm
- Zip Code: E1A7J3
- Skype Name: R.H. "Rudi" Saueracker, SSM
- Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger - Circle of Safety: Y
- Twitter ID: Rudi Saueracker, SSM
- Location: NB Dieppe, Canada
Re: Transmission rattle
glcycle
Coming in a little late but G'day to you and glad you figured it out.
Coming in a little late but G'day to you and glad you figured it out.
to Farmallcub.com Forum Family. And you have come to the right place for all things Cub related. If you click on the Site Rules, Regulations, & Important Information, it will point you to the Welcome Wagon wherein you will find links to many useful sites and topics. One of the most important resources are Owner's Manuals, Parts Catalogs and Service Manuals. The Cub Manual Server is the home of the jpg versions and the [url=http://www.farmallcub.com/[ Sorry, direct links to manual section is not allowed. ]/index.php]PDF Manuals[/url] -- well the pdf's of course Enjoy!.
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship
-
- Similar Topics
- Replies
- Views
- Last post
-
-
Where Can I Find Rattle Can Federal Yellow in a Pinch?
by superstevek1 » Sat Apr 16, 2022 1:22 pm » in Farmall Cub - 3
- 335
-
by Matt Kirsch
Tue Apr 26, 2022 9:01 am
-
-
- 3
- 146
-
by Barnyard
Tue Jun 27, 2023 5:48 pm
-
- 1
- 125
-
by Glen
Mon Jul 25, 2022 6:30 pm
-
- 3
- 330
-
by tenn terry t
Sun May 23, 2021 9:38 pm
-
- 16
- 852
-
by outdoors4evr
Tue Mar 19, 2024 8:58 am
Who is online
Users browsing this forum: Majestic-12 [Bot], Masmith and 8 guests