The working surface is usually polished metal. I believe most manufacturers nowadays just paint the digging part black for shipping.
You can try a rust inhibitor if you intend to use it. Cosmoline is still available, and LPS 3 coats the surface with a waxy layer that should last the winter.
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Cub IH 193 Plow Moldboard question
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 5+ Years
- Posts: 280
- Joined: Wed Sep 10, 2014 12:47 pm
- Zip Code: 00000
- Tractors Owned: 1948 Farmall Cub
1939 Farmall H
1959 MF 202
1965 MF 180
1937 Caterpillar 22 - Circle of Safety: Y
- Location: BC Canada
-
- 10+ Years
- Posts: 142
- Joined: Tue Jan 28, 2014 10:33 pm
- Zip Code: 29526
- eBay ID: SC_Elvis
- Tractors Owned: 1954 Farmall Cub
194 Farmall Plow
1984 JD 320 Garden Tractor
1952 BF Avery/MM model V
C-16 Middle Buster
C-22 Sickle Mower
172 Planter w/ Duplex Hopper
Cole Duplex Planter
F3 Spring Tooth Harrow
Super A
100 Manure Spreader
F-17 Middle Buster
184 planter (2)
Fast Hitch 2 way plow - Circle of Safety: Y
- Location: Conway, SC
Re: Cub IH 193 Plow Moldboard question
Lorisfarmer were are you located in Loris. I'm a big cub fan over at Dorman's Cross roads on Hwy 19.
Patrick Elvis
CSA_CUB
Conway, SC
CSA_CUB
Conway, SC
-
- 5+ Years
- Posts: 355
- Joined: Mon Sep 15, 2014 10:16 am
- Zip Code: 29527
- Tractors Owned: 1951 Farmall H - "Ray R." (SN FBH 366519)
1959 Farmall Cub - "Pea" (SN 211538 J)
1964 IH Cub Cadet 100 - (SN 92562)
1971 IH Cub Cadet 106 - (SN 380760)
2018 Husqvarna YTH18542
Tractor previously owned:
1951 Farmall Cub - "Johnny R." - Circle of Safety: Y
- Location: Conway, South Carolina
Re: Cub IH 193 Plow Moldboard question
Well, I got the 193 properly attached to the Cub (with some much appreciated advice and a couple more parts from Joe Brewer at Retrorowcrop!). Got it in the ground and plowed my garden and my neighbor's plot with no problem (other than when I stopped it in the front yard to hose it off - then forgot the plow was in a down position - it nicely plowed up about 10 feet of the yard when I went to move it - oops...)
I thought I would wait until after fall plowing to repaint the plow blue, so that is the next project, probably after Christmas.
Here's a pic of the setup.
Jim
I thought I would wait until after fall plowing to repaint the plow blue, so that is the next project, probably after Christmas.
Here's a pic of the setup.
Jim
"That's the great thing about a tractor. You can't really hear the phone ring."
Jeff Foxworthy
1951 Farmall H
1959 Farmall Cub
1964 IH Cub Cadet 100
1971 IH Cub Cadet 106
2018 Husqvarna YTH18542
-
- 5+ Years
- Posts: 355
- Joined: Mon Sep 15, 2014 10:16 am
- Zip Code: 29527
- Tractors Owned: 1951 Farmall H - "Ray R." (SN FBH 366519)
1959 Farmall Cub - "Pea" (SN 211538 J)
1964 IH Cub Cadet 100 - (SN 92562)
1971 IH Cub Cadet 106 - (SN 380760)
2018 Husqvarna YTH18542
Tractor previously owned:
1951 Farmall Cub - "Johnny R." - Circle of Safety: Y
- Location: Conway, South Carolina
Re: Cub IH 193 Plow Moldboard question
a
"That's the great thing about a tractor. You can't really hear the phone ring."
Jeff Foxworthy
1951 Farmall H
1959 Farmall Cub
1964 IH Cub Cadet 100
1971 IH Cub Cadet 106
2018 Husqvarna YTH18542
-
- 10+ Years
- Posts: 1880
- Joined: Wed May 23, 2007 7:35 am
- Zip Code: 61736
- Tractors Owned: '45 SC Case
- Circle of Safety: Y
- Location: IL, Downs
Re: Cub IH 193 Plow Moldboard question
Good coating of used 30W oil between usings if stored inside, otherwise,coating of gun grease!
Grandpa's '41 B
'56,,'57,'59, Cu'b
'45 C
'55 Case S
Dad's DB garden tractor
'48 DeSoto
'31 "A Coup
'79 Lincoln TC
God looks out for those of us who don't know how to look out for ourselves!
'56,,'57,'59, Cu'b
'45 C
'55 Case S
Dad's DB garden tractor
'48 DeSoto
'31 "A Coup
'79 Lincoln TC
God looks out for those of us who don't know how to look out for ourselves!
-
- Team Cub Mentor
- Posts: 20379
- Joined: Fri Jul 02, 2004 9:52 pm
- Zip Code: 65051
- Circle of Safety: Y
- Location: Mo. Linn
Re: Cub IH 193 Plow Moldboard question
As a kid in Iowa we used gun grease on the moldboards and shears at the end of the plowing season.
Currently using left over spray can paint to coat the moldboard and shear.
Currently using left over spray can paint to coat the moldboard and shear.
I have an excuse. CRS.
-
- 5+ Years
- Posts: 1
- Joined: Mon May 23, 2016 8:21 pm
- Zip Code: 02809
Re: Cub IH 193 Plow Moldboard question
New to forum. I have the same Chattanooga moldboard GP 6008. Does anyone know what replaces it. One of mine is cracked. Any help would be great.
-
- Similar Topics
- Replies
- Views
- Last post
-
- 2
- 143
-
by baldwindiesel
Sun Apr 02, 2023 11:20 am
-
-
L-F194 Moldboard Plow - Unique Attachment(s)
by Peter Person » Sat Jan 21, 2023 7:28 pm » in Farmall Cub - 2
- 662
-
by SamsFarm
Mon Jan 23, 2023 1:41 pm
-
-
- 3
- 267
-
by Dave@53558
Sat Oct 14, 2023 6:18 pm
-
- 8
- 418
-
by KETCHAM
Thu Mar 14, 2024 7:28 am
-
- 12
- 550
-
by Dusty B
Sat Apr 02, 2022 12:51 pm
Who is online
Users browsing this forum: No registered users and 10 guests