New project cub 57 model

[Tim36]

Hi new to this site just got a 1957 project cub to restore today motor is stuck so going to need a rebuild done I would post a picture but can't figure out how

[staninlowerAL]

Welcome to the forum. Check out the "HOW TO" Subforums, you'll find lots of useful information.

[Stanton]

Here's a link to the How To section "Using the Forum" (several helps on posting pics): http://www.farmallcub.com/phpBB2/viewforum.php?f=148

Here's some help from one of our members (Scrivet):

"Full Editor & Preview" mode
"Attachments" tab
"Add files" button
Navigate to the picture you want on your computer
Select it and click "open", watch for green checkmark by Status:
Place your cursor and click where you want the picture in your message
Click on "Place inline"
Select "Preview" to see your picture and whole message.

I always try to hit the Preview button after composing each post. What comes up will be exactly what everyone else sees, including pictures. So, if you don't see pictures in your Preview, keep trying.

Congrats on your new-to-you '57 project tractor.

[John *.?-!.* cub owner]

I have been on the forum so long I have forgotten some of it, but I believe you have to make a few posts before you can post pictures. Many sites are that way to discourage spammers.

[Bob McCarty]

Welcome to the Forum.

Bob

[Tim36]

Will found how to post pictures but keep getting errors file to large

[staninlowerAL]

Resize the picts to less than 900x800 for example.

[international 274]

Welcome.

[Tim36]

New to me 57 cub

[Tim36]

Thanks for the information got it on but the picture not that good

[Tim36]

This is my work horse