1969 IH Cub with Belly Mower - not sure make

[Urbish]

I couldn't really tell by the photos in the IH Danco C-2 Mower manual. Also, where can I find a good parts manual? Thanks.

Top left of the page: Quick Links->PDF Manuals->Farmall Cub->Cub Attachments->Mowers->Danco C2 about halfway down the list

Also, looking at the parts diagram, #15 - Belt Guide. You could probably make one from 1/4" structural rod.

[4dogs]

Thanks for that info,Urbish. I'm still finding my way around the forum. The members have been great.

[4dogs]

Still working out the kinks. Where can I find over-riding clutch parts for the IH Danco C2 Belly Mower?

[Bob McCarty]

Where can I find over-riding clutch parts for the IH Danco C2 Belly Mower?

What exactly do you need? It looks like some parts are still available from Case/IH, but pricey. If you get the pins and springs out and cleaned up, they may still be serviceable.

Bob

[4dogs]

It's the hub... The springs were weak and rusty and I order new ones.

[4dogs]

Update: Adjusted the hub spacing and it worked.

[Clip]

It's been a while since I looked at mine. How did you adjust hub spacing? Shims or a set screw? Can't remember how mine was set up.

[4dogs]

Used washers as shims which eliminated the vertical play in the pulley. The overriding clutch sounds like a ratchet. It mows like a champ.