New member Fron Argentina South America.

[ngs.rural]

Hi all! I am Daniel, I'm 50 and with my oldest son Natalio (19), we are on the farmall restoration. Ours has been on a on a shed for may mamy years and we couldn't start it yet. My son cleaning it without the hood. Sorry for my limited english we are a spanish speaking country

[Bob McCarty]

Hi Daniel, Welcome to the Forum. What model Farmall do you have? Please let us know if we can be of any help.

[Jim Becker]

Here is a link to his picture. Looks like a pretty decent Cub.
https://photos.app.goo.gl/UoFoM3d94nYAhLJx9

[Mike in Louisiana]

Welcome to the forum.

[Dale Finch]

You really ARE from the"Deep South"!!

WELCOME!!

[Stanton]

Welcome to the Forum, Daniel.

Take some time and read through a few threads to acquaint yourself with the Forum:

• Welcome Wagon
• How to Upload Pictures to a Post
• Forum Picture Posting And Other Interesting Things You Can Do
• Using the Forum

Don't know if you have any of the manuals to your Cub, but after your 2nd posting on the Forum, you'll have access to the all the manuals on this site. There’s a few ways to do that:

• From a desktop or laptop, go to "Quick Links" in the upper left corner of your screen. Hit that and a pull-down appears where you'll find "PDF Manuals".
• You can also go to “Cub Info” in the upper toolbar, then hit “Rudi’s Manuals”. From there, you can access a variety of information.
• If you're using a phone, go to the "Links Directory" (second category down the main page). Once in "Links Directory" , scroll down to the second section "Tractor Parts & Manuals" and you'll find them there.

You'll be able to download an Owner's Manual (very strongly recommended) and any service manuals that interest you. Implement Manuals are also available.

We’d encourage you to take the Safety Test located in the Safety Forum: http://farmallcub.com/phpBB2/viewtopic.php?f=33&t=68084

There are a lot of good threads dealing with Cub repair and maintenance in the How To Forum. Located here: http://farmallcub.com/phpBB2/viewforum.php?f=11

Do you know what year your Cub was made? There should be a serial number plate, located on the front, right side of the tractor where the steering rod connects to the front end. That number may be entered in the "What Year is My Cub?" category located here: http://farmallcub.com/phpBB2/app.php/page/cub-information

There are also casting dates on your cast iron pieces that you may cross reference here: http://www.tmtractor.com/id/id_001.htm

Remember:
• When you have a specific question, start a new thread in the appropriate sub-forum.
• Before posting, use the Preview button before hitting Submit--it'll show you exactly what your post will look like, including pictures.
• When adding your comments to a thread, be sure to look at the date of the last poster. If it’s more than a 6 months old, the posters are probably not going to see it. Consider starting a new thread.

Glad you joined us.

[indy61]

[ngs.rural]

Thank you for your welcome!
Mine is a 1951 Cub 1000 cc Gasoline engine, I don't know if there is a diesel version. I have some pics of how I found it and the work I'm doing on it.

https://photos.app.goo.gl/VMFjmHdqXx8QGKKY6
https://photos.app.goo.gl/eaJk5NaCjmcY8hz78

[JustJim]

Hello Daniel!

Looks like a good project for you and your son. I know you'll get it started!

I wonder though, when you do, if it will sound like all of the other Cubs, or if there may be the faint strains of Carlos Gardel heard in it's song?

[Pap]

Welcome to the forum Daniel. I know you are at the right place to learn about your cub. Good luck with it.