hi

Post your introduction and "get to know me" information in this forum.

Moderator: Team Cub

hi

Postby ellen » Sat Jul 07, 2007 5:04 pm

Hi everyone I am new to this forum. Today I took posession to my dads cub. He passed away 5 years ago and my mom 1 year ago. My 7 siblings and I are cleaning out 60 years of posessions and I got the cub. My DH and I would like to do some much needed work on it and I need to know what year it is? Is it a Lo boy? just some general info. I got a # off the front right plate and one stamped on the side of the motor. How do I tell I tried to figure it out by the list on the cub info but I can make no sence of it. Can any one help??
I love my little cub and have all of my life I want to make my daddy proud by taking good care of it.
Thanks
ellen
5+ Years
5+ Years
 

Postby magnumpi » Sat Jul 07, 2007 5:56 pm

Welcome, Ellen - sorry about the circumstances but glad you had the foresight to gain control of the Cub. Up on the right front frame rail, there should be an aluminum plate that gives all the info needed to determine the year of your Cub. Craig
magnumpi
5+ Years
5+ Years
 

Postby Bigdog » Sat Jul 07, 2007 6:00 pm

Ellen - If you will list the information on the serial number plate perhaps we can help you. A picture will also help us identify it.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.

My wife says I don't listen to her. - - - - - - - - Or something like that!

http://www.cubtug.com
User avatar
Bigdog
Team Cub
Team Cub
 
Posts: 23820
Joined: Sun Feb 02, 2003 12:50 pm
Location: OH, Stoutsville
Zip Code: 43154
Circle of Safety Award
Circle of Safety: Y

Postby Dan England » Sat Jul 07, 2007 6:01 pm

Ellen: If you will post the number from the plate we can determine the year your Cub was built. And, welcome to the forum. We hope you visit frequently. Forum members can answer most of the questions which you might have on care and use of your Cub. Dan
Dan England
10+ Years
10+ Years
 
Posts: 3094
Joined: Sun Feb 02, 2003 8:37 pm
Location: AR, Waldo
Zip Code: 71770
Skype Name: danengland1

Postby ellen » Sat Jul 07, 2007 7:05 pm

the front plate has the #s 127849

1800

The #s stamped on the side in front of the clutch are

351686-R2

The IH logo L 2 X

All of the last numbers are raised except for the X It goes in

Thanks for your help I knew I could count on yall
ellen
5+ Years
5+ Years
 

Postby Ron Luebke » Sat Jul 07, 2007 7:23 pm

it looks like you have a 1951 f cub which isn't a loboy. glad you got the cub. what part of georgia are you from? welcome to the cub family :!:
TED NUGENT FOR PRESIDENT !!!

' its just plain ole Ron '
User avatar
Ron Luebke
5+ Years
5+ Years
 
Posts: 3173
Joined: Fri Jun 02, 2006 1:57 pm
Location: Ga, Acworth
Zip Code: 30102
eBay ID: 9716ron

Postby Jim Becker » Sat Jul 07, 2007 7:30 pm

1951 Farmall Cub, assuming the serial plate hasn't migrated from another tractor.
User avatar
Jim Becker
Team Cub
Team Cub
 
Posts: 11923
Joined: Sun Feb 02, 2003 3:14 pm
Location: MN
Zip Code: 55319
Circle of Safety Award
Circle of Safety: Y

Postby ellen » Sat Jul 07, 2007 8:09 pm

Thanks for the info

Ron
I live in Good Hope in Walton County
ellen
5+ Years
5+ Years
 

Postby John *.?-!.* cub owner » Sat Jul 07, 2007 8:20 pm

"The Constitution is not an instrument for the government
to restrain the people, it is an instrument for the people to restrain the
government lest it come to dominate our lives and interests." Patrick Henry
User avatar
John *.?-!.* cub owner
Team Cub Guide
Team Cub Guide
 
Posts: 19457
Joined: Sun Feb 02, 2003 2:09 pm
Location: Mo, Potosi
Zip Code: 63664
Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.

Postby Pete1941 » Sat Jul 07, 2007 8:40 pm

Welcome to the Forum and to the greatest FAMILY anywhere on the web.
Pete1941
5+ Years
5+ Years
 

Postby Kodiak » Sat Jul 07, 2007 8:48 pm

Ellen,
Welcome to the forum. There are a lots of very helpful pepole on this forum and they all will gladly assist you any way they can. There are several people from Georgia on here too. Ron L., Pete1941, City Cub, Corky's Cub, Bald, and myself and probably some I missed.
If you have time in October come on up to Gillsville, Ga. the 5th and 6th to my Stonethrow Cubfest. Come look, learn and ask questions or load up your cub and we'll help you fix whatever you like! It's a fun weekend with lots to do. Check announcements for more info. It's not that far from Good Hope :D

This link might be helpful too:
http://www.cleancomputes.com/Cub/index.html

Ron W.
I bought an old tractor all dusty and worn,
knew nothing about her just the year she was born
I washed her and greased her and painted her red
Now she lives happily right here in my shed.

HOME of THE STONETHROW CUBFEST
2007 Cub Tug Champion
User avatar
Kodiak
Cub Pro
Cub Pro
 
Posts: 3402
Joined: Fri Sep 24, 2004 9:02 pm
Location: Ga. Gillsville
Zip Code: 30543
Tractors Owned: 1948 Cub
1955 Cub
Circle of Safety Award
Circle of Safety: Y

Re: hi

Postby Rudi » Sat Jul 07, 2007 10:12 pm

Ellen:

ellens cub wrote:Hi everyone I am new to this forum. Today I took posession to my dads cub. He passed away 5 years ago and my mom 1 year ago. My 7 siblings and I are cleaning out 60 years of posessions and I got the cub. My DH and I would like to do some much needed work on it and I need to know what year it is? Is it a Lo boy? just some general info. I got a # off the front right plate and one stamped on the side of the motor. How do I tell I tried to figure it out by the list on the cub info but I can make no sence of it. Can any one help??
I love my little cub and have all of my life I want to make my daddy proud by taking good care of it.
Thanks


First off.. just by doing what you are doing you are honouring your Daddy and making him proud. We will do what we can to help you as you travel this road. Hopefully the information in the Welcome Wagon below will help you out some. I know there is a ton of stuff there... and it may seem overwhelming, but just take it one bite at a time. Grab a cup of coffee, a comfy chair and set down to read. You can hit the Manual Server link above at any time to get to it.

First, Image to the greatest forum on the internet, and to the Cub Family. You will find that all the folks on this forum are kind, helpful and just full of Cub info and knowledge. They also happen to be the finest folks I have ever met :!: :D

Ok, so here is the spiel Image:

I would suggest that you read this thread: New Members and Visitors, Please READ Prior to Posting. There are many great links to informative pages such as the ATIS FAQ's 1 and ATIS FAQ's 2, The Best of H.L. Chauvin who has written very interesting articles on troubleshooting common problems with your Cub. One of the other projects we have been working on and it will be a continuing effort is the How To Work on Your Cub - Maintenance Tips and Techniques. This the the place to go to get all the quick links to some very good articles written by many members of the forum on solving some of the problems we encounter as we repair, maintain and up-grade our Cubs. Keep looking for this to grow.


Also, you might want to visit the Cub Manual Server as there is tons of info on servicing, maintaining and re-building your Cub. In addition to this basic information, there are also a number of other useful tools available on the server. There is the Specialty Services page which has contact info for neat stuff like getting your seats recovered, buying quality Decals, Serial Number tags and a host of other neat items. Also there are the Parts Pages - both Used Parts Suppliers and New Parts Suppliers pages with links to quality dealers. I am always looking for YOUR favourite dealers for New and Used Parts to include here. These pages are intended to complement our Official FarmallCub.com Website Sponsors:

I would also recommend that you visit Binder Books and purchase the three most important manuals you can own for Maintenance, Repair and Rebuilding your Cub. These are the Owner's Manual, the GSS-1411 Service Manual and the TC-37F Parts Manual. Although they are available on the Cub Manual Server, it is better if you also have your own paper copy. Binder Books is the only Authorized IH Publication Reprint House and they have the best quality manuals available. Most other's are not of the same quality. Just a personal thought here, the I&T Shop Manuals, although helpful in some areas, really are not sufficient for the job. If you wish though, they are good additional reference works.

IF you really want to get the skinny on all things Cub, might I suggest you get a copy of Ken Updike's Farmall Cub and Cub Cadet's :?: . While you are at it Original Farmall Cub and Cub Cadet is Ken's latest addition to the series. Along with Guy Fay's Letter Series Originality Guide, these are three must have's in anyone's collection.

In addition to the above information, don't forget to check out the various articles that are available to help with your Repair, Restore, Rebuild or just your Maintenance Projects. There are a number of sub pages such as Electrolysis or Rust Zapper's, Maintenance Tips, Jigs and Techniques, Implement and Part Sketches and of course the Paint, Decals & Other Finish Questions which has the Paint Chart and the Paint Committee Decisions links.

Oh, and while the program still lasts.. you might want to check the Announcement: Navistar Free Gas Cap Offer - On-Line Form thread at the top of the Cub Forum and send away for the new style safety cap before that program runs out as well.

I truly hope that you enjoy your Cub and that you will be a frequent contributor to the forum. Again, Image to the Cub FamilyImage :D
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship

User avatar
Rudi
Team Cub
Team Cub
 
Posts: 28471
Joined: Sun Feb 02, 2003 8:37 pm
Location: NB Dieppe, Canada
Zip Code: E1A7J3
eBay ID: ve9rhs
Skype Name: R.H. "Rudi" Saueracker, SSM
Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1951 Cub "Jethro"
Dad's Putt-Putt
IH 129 CC
Circle of Safety Award
Circle of Safety: Y
Twitter ID: Rudi Saueracker, SSM

Postby deputy jailer » Sun Jul 08, 2007 12:19 pm

WELCOME TO THE FORUM 8)
deputy jailer
5+ Years
5+ Years
 

Postby Ron Luebke » Mon Jul 09, 2007 6:44 pm

goodhope , i believe that is close to monroe.? close enough to come out to stonethrow. hope to see ya there :wink:
TED NUGENT FOR PRESIDENT !!!

' its just plain ole Ron '
User avatar
Ron Luebke
5+ Years
5+ Years
 
Posts: 3173
Joined: Fri Jun 02, 2006 1:57 pm
Location: Ga, Acworth
Zip Code: 30102
eBay ID: 9716ron

Postby ellen » Mon Jul 09, 2007 9:04 pm

I'll do my best to be there. I assume I can get info about it on this forum.?.?
ellen
5+ Years
5+ Years
 

Next

Return to Introduce Yourself

Who is online

Users browsing this forum: No registered users and 2 guests