The question comes up quite often so I thought I'd just take the time to write it up here in the how-to forum for a reference.
Polarization restores the residual magnetism in the cores of the generator armature so that when the generator starts charging it will do so in the proper polarity.
It is usually not necessary to re-polarize unless the generator has been removed and repaired or the regulator has been changed. If this has occured, then re-polarization must be done before starting the tractor. Otherwise, the generator may not charge or it could charge in the reverse direction.
Re-polarizing is relatively easy to do. All that is necessary is to briefly connect the generator armature to the battery hot terminal. The most convenient way to do this is to take a short jumper wire and touch it to the "Batt" and "Gen" terminals on the voltage regulator. At the moment of contact you should see a slight spark. This indicates that the process is completed.
It should be noted that it is the generator that is being polarized, not the regulator.
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
How To Polarize Your Generator
-
- Team Cub Mentor
- Posts: 24144
- Joined: Sun Feb 02, 2003 12:50 pm
- Zip Code: 43113
- Circle of Safety: Y
- Location: OH, Circleville
How To Polarize Your Generator
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
-
- Team Cub
- Posts: 17291
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
-
- Cub Pro
- Posts: 7013
- Joined: Sun Feb 02, 2003 9:36 pm
- Zip Code: 43420
- Circle of Safety: Y
- Location: OHIO, Fremont
I'm not real up on this electrical magic stuff, but I thought the residual magnetism was in the iron core (armature) of the field windings?
George Willer
http://gwill.net
The most affectionate creature in the world is a wet dog. Ambrose Bierce
http://gwill.net
The most affectionate creature in the world is a wet dog. Ambrose Bierce
-
- Team Cub
- Posts: 17291
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
Looks like a semantic difference. Go to this page then look at pages 7 and 8.
http://www.cleancomputes.com/Cub/Cub%20Parts%20Manuals/TC-37F%20Revision%203/Group%2008%20-%20Electrical/index.html
The residual magnetism is in reference number 20 (a pair of them), not reference 40.
http://www.cleancomputes.com/Cub/Cub%20Parts%20Manuals/TC-37F%20Revision%203/Group%2008%20-%20Electrical/index.html
The residual magnetism is in reference number 20 (a pair of them), not reference 40.
-
- Similar Topics
- Replies
- Views
- Last post
-
- 10
- 376
-
by Potato Wilson
Sun Dec 18, 2022 9:32 pm
-
- 17
- 640
-
by Matt Kirsch
Mon Mar 18, 2024 2:17 pm
-
- 11
- 554
-
by Gary Dotson
Thu Sep 29, 2022 7:34 am
-
- 7
- 305
-
by halftonstude
Wed Nov 23, 2022 5:06 pm
-
- 2
- 738
-
by Gary Dotson
Wed May 10, 2023 7:31 am
Return to “Ignition/Electrical”
Who is online
Users browsing this forum: No registered users and 1 guest