.600 for.250
.815 for.090
.950 for.090
.650 for.250
Drill .328 hole, insert 10-24 coupling nut, use two 10-24x3/8 screws.
Use the original locking clip on the inside of the light
Repairing Pancake Style Housings with a Custom Nylon Contact
Moderators: Barnyard, Team Cub
1 post
• Page 1 of 1
Repairing Pancake Style Housings with a Custom Nylon Contact
by LiL' Red » Tue Feb 07, 2006 8:07 pm
Turned these up on the lathe, any durable plastic will do, I used nylon. The dimensions are, from the screw head end:
.600 for.250
.815 for.090
.950 for.090
.650 for.250
Drill .328 hole, insert 10-24 coupling nut, use two 10-24x3/8 screws.
Use the original locking clip on the inside of the light
.600 for.250
.815 for.090
.950 for.090
.650 for.250
Drill .328 hole, insert 10-24 coupling nut, use two 10-24x3/8 screws.
Use the original locking clip on the inside of the light
- LiL' Red
- 501 Club
- Posts: 915
- Joined: Sat Jun 18, 2005 9:41 pm
- Location: IL, Galesburg
- Zip Code: 61401
- eBay ID: woodpecker56
1 post
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 2 guests
|
|