Carb kit

[jdeere86]

Hey everyone

Just looking on yesterdays tractors for a carb kit and they seem to be listed by zenith serial number. I have a bendix carb which I guess is the same as a zenith. Have not located a serial number

2F13ABC3-519A-4019-9ACD-43F04E215FD6.jpeg (32.96 KiB) Viewed 230 times

36A40DEA-E27C-4A04-BC3F-962657906489.jpeg (35.54 KiB) Viewed 230 times

My choices for carb kits are..
https://www.yesterdaystractors.com/Farm ... _Z103.html
https://www.yesterdaystractors.com/Farm ... _Z101.html

https://www.yesterdaystractors.com/Farm ... K2119.html

https://www.yesterdaystractors.com/Farm ... BK44V.html

Which one would fit?

Thank you

[Eugene]

https://www.ebay.com/itm/314176775897?c ... gK8VPD_BwE

[Bob McCarty]

Clean off the area on the top above where it says Bendix. You may find a number stamped in the top, or a round tag. Match the shape of the body gasket (4 hole) to pick the right kit.

[jdeere86]

no serial number in site

[staninlowerAL]

You can try Morgan McDonald, phone 706-367-4179. He can probably fix you up with what you need. Stan

[jdeere86]

Thank you all. I will try giving him a call. Silly question: I am looking at the link Eugene sent as well as one of the sets on yesterdays tractors. One of the gasket looks like a good fit however it has an extra screw hole,.,.5 instead of 4....because of the location would it matter if one of the holes wasn't used

[Gary Dotson]

No, I’ve seen several with the little gasket tab sticking out. That set gives you 3 to choose from, one of them should fit.

[Dale Finch]

I could be wrong, but I think the carb that that particular gasket goes to had a later version where they added a screw to it to help prevent warping & a better gasket sealing.

I used one on a carb I was rebuilding and simply trimmed that piece of gasket.

[jdeere86]

Thank you thank you