Point Gap For Super A With Distributor

[ricky racer]

Can someone please tell me the correct point gap for the points on a Super A with a distributor ignition? All the manuals I've found on here are for a magneto ignition.
Thank you!

[Don McCombs]

Take this for what it’s worth. The Super A and Super C use the same engine. The point gap for the Super C with battery ignition is .020.

[Jim Becker]

All the IH distributors that look like the one on a Cub use a point gap of 0.020. (Advance curves vary, but the points portion is the same.)

[ricky racer]

Thanks guys. I appreciate it. I'm doing some work on a friends tractor.

[Dale Finch]

This might help with that (page 41) and other stuff:
https://farmallcub.com/rudi_cub/www.cleancomputes.com/Cub/Super%20A%20-%20Super%20AV/Super%20A%20-%20Super%20AV%20Owner's%20Manual/Super%20A%20-%20Super%20AV%20Owner's%20Manual.htm

[ricky racer]

Thanks Dale!

[AL Farmall Boy]

Like Jim said, The distributor advance may differ between different models; otherwise the IH 4-cyl distributors are the same. 0.020 (thousands of an inch) for the point gap.