This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
farmall A again
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 17
- Joined: Wed May 06, 2009 9:55 pm
- Zip Code: 38230
- Tractors Owned: 1949 cub,1951c 1947 a 1970,135 massey
- Location: north west tn
farmall A again
Hello again, I still got no spark to distributor. Set rotor to no. one tower after impulse coupler snapped, with engine on compression stroke for no. one cylinder What could it be?
-
- Team Cub Mentor
- Posts: 24144
- Joined: Sun Feb 02, 2003 12:50 pm
- Zip Code: 43113
- Circle of Safety: Y
- Location: OH, Circleville
Re: farmall A again
Archie - I don't know if I mis-understood your previous post or not. Did you say you had spark from the coil but not from the distributor (to the plugs).
Your statement in this post is that you have no spark to the distributor. Can you clarify?
Your statement in this post is that you have no spark to the distributor. Can you clarify?
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
-
- 10+ Years
- Posts: 17
- Joined: Wed May 06, 2009 9:55 pm
- Zip Code: 38230
- Tractors Owned: 1949 cub,1951c 1947 a 1970,135 massey
- Location: north west tn
Re: farmall A again
Hey Bigdog,what i have is an h-4 mag with the square coil on top of it. All original. I have a hot spark from it holding about 1/4 inch from tractor iron. but i have nothing exiting the plug wires. Thanks
-
- Team Cub Mentor
- Posts: 24144
- Joined: Sun Feb 02, 2003 12:50 pm
- Zip Code: 43113
- Circle of Safety: Y
- Location: OH, Circleville
Re: farmall A again
OK - you have fire from the coil but not from the distributor. That means the coil and the lead from it are OK as are the points. Your problem is in the delivery system - ie the distributor and rotor. As mentioned in your other post if you have the rotor pointing at #1 just after the impulse kicks you should be in time. Make sure your rotor is contacting the cap at the center tower.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
Return to “Farmall A, Super A, AV, 100, 130 & 140”
Who is online
Users browsing this forum: No registered users and 1 guest