This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Torque sequence for super a
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 4
- Joined: Tue Apr 30, 2013 4:45 pm
- Zip Code: 39476
Torque sequence for super a
I recently inherited my grandfathers super a and had to remove head to un seize engine. My question is what is the torque sequence for the head. I found the ft lbs online but can't find out in which order they need to be torqued
-
- 10+ Years
- Posts: 358
- Joined: Thu Jun 30, 2011 9:19 pm
- Zip Code: 32327
- Tractors Owned: Now
73 MF 165
63 MF 203 Ind
44 BF Avery "A" Project
51 Farmall Cub
49 Farmall Cub
48 Farmall Super A - Circle of Safety: Y
- Location: Crawfordville, Fla
Re: Torque sequence for super a
I am not sure of a sequence, however if you start from the center and work your way out, you should be ok. I have done this in the past with no problems.
Welcome to the forum.
Bill
Welcome to the forum.
Bill
"Work smarter; Not harder"
-
- 10+ Years
- Posts: 4
- Joined: Tue Apr 30, 2013 4:45 pm
- Zip Code: 39476
Re: Torque sequence for super a
Thanks. I have also heard it was wise to after assembly crank the tractor and let it reach operating temp and re torque the head is this true?
-
- 10+ Years
- Posts: 4949
- Joined: Tue Jun 08, 2004 3:04 pm
- Zip Code: 14559
- Circle of Safety: Y
- Location: Rochester, NY
-
- 10+ Years
- Posts: 4
- Joined: Tue Apr 30, 2013 4:45 pm
- Zip Code: 39476
Re: Torque sequence for super a
Thanks. I have one more question. I've never torqued a head before so do I go straight to the required torque specs or start out at a low ft lbs and work my way up in the same sequence to the required specs. The reason why I ask is because in my job I work with atot of flanges( valves, B.O.P.'s, etc) and to get a good even seal on the gasket u would start low ft lbs and work your way up and every bone in my body is telling me to do that so before I mess something up can anyone tell me.... Thanks
-
- 10+ Years
- Posts: 4565
- Joined: Wed Feb 05, 2003 1:18 pm
- Zip Code: 45365
- Tractors Owned: Home to "Rusty", the 2007 and 2009 Cub Tug Champion.
- Circle of Safety: Y
- Location: OH, Sidney
Re: Torque sequence for super a
Yes, take it up in steps.
-
- 10+ Years
- Posts: 4
- Joined: Tue Apr 30, 2013 4:45 pm
- Zip Code: 39476
Re: Torque sequence for super a
10-4 thanks for the advice.
-
- Similar Topics
- Replies
- Views
- Last post
-
-
HP and torque curves c113 and c123 engines
by inairam » Wed Apr 12, 2023 1:25 pm » in Farmall A, Super A, AV, 100, 130 & 140 - 5
- 322
-
by inairam
Sun Apr 16, 2023 7:37 am
-
-
-
Need to I.D Super A
by browning1 » Sun Nov 05, 2023 8:19 pm » in Farmall A, Super A, AV, 100, 130 & 140 - 5
- 926
-
by browning1
Fri Jan 26, 2024 3:36 pm
-
-
- 5
- 201
-
by Ang
Thu Jan 19, 2023 3:19 pm
-
-
First Super A Attachment(s)
by CDKL » Tue May 31, 2022 10:38 am » in Farmall A, Super A, AV, 100, 130 & 140 - 24
- 815
-
by Ole Timey Farmin
Sat Jun 18, 2022 3:53 pm
-
-
- 7
- 990
-
by Ole Timey Farmin
Sat Jun 18, 2022 2:59 pm
Return to “Farmall A, Super A, AV, 100, 130 & 140”
Who is online
Users browsing this forum: No registered users and 0 guests