Well,
I've got the tranny on the bench now. Following the service manual from Binder, it says to "remove the snap-ring from reverse gear, and slide shaft out rear of trans".
There is no snap ring that I can see on the gear, but there is a pin through it holding it to the shaft. I'm thinking this is a typo and that pin sure looks like it has to come out for the shaft to move.
I have the drive shaft flange and key removed.
If I can only figure out how to resize pictures I could post some of my progress.
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
130 Transmission Rebuild
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 1185
- Joined: Tue Feb 11, 2003 6:33 pm
- Zip Code: P0M1Z0
- Tractors Owned: 49 Cub
67 International Cub Loboy
57 Farmall 130 - Location: Northern Ontario
130 Transmission Rebuild
Just Do It !
-
- 10+ Years
- Posts: 3414
- Joined: Sat May 15, 2004 11:10 am
- Zip Code: 49229
- Location: MI, Britton
Re: 130 Transmission Rebuild
Ed I haven't had a 130 trans apart but I would say you are right. I can't wait until you have her up and running. Its no fun having a 130 down If you want you can send the pictures to me and I will resize them for you.
Billy
Billy
Take care of your equipment and it will take care of you. 1964 cub. Farmall 100 and 130.
"Those that say it can’t be done should not interrupt the ones who are doing it.”
"Those that say it can’t be done should not interrupt the ones who are doing it.”
-
- 10+ Years
- Posts: 1185
- Joined: Tue Feb 11, 2003 6:33 pm
- Zip Code: P0M1Z0
- Tractors Owned: 49 Cub
67 International Cub Loboy
57 Farmall 130 - Location: Northern Ontario
Re: 130 Transmission Rebuild
Billy,
I got it all apart this afternoon.
Now time to start ordering the parts.
It's amazing what you can accomplish once the wrenches start turning.
Lets see....still have to do both final drives, rebuild the Touch Control, fix that sloppy steering box.......good thing the engine is already rebuilt! (by P.O.)
Spring is just around the corner.
I got it all apart this afternoon.
Now time to start ordering the parts.
It's amazing what you can accomplish once the wrenches start turning.
Lets see....still have to do both final drives, rebuild the Touch Control, fix that sloppy steering box.......good thing the engine is already rebuilt! (by P.O.)
Spring is just around the corner.
Just Do It !
-
- 10+ Years
- Posts: 3414
- Joined: Sat May 15, 2004 11:10 am
- Zip Code: 49229
- Location: MI, Britton
Re: 130 Transmission Rebuild
Cool Ed
Check out the water pump while you have it apart. I have to do the touch control, brakes, water pump. And pull the steering gear box apart. There is a clip on top of the top bearing on the gear sector shaft. Which I think is missing on the new 130. The steering is tight but if the wheels are hard to turn then I have some drift it the steering.
Billy
Check out the water pump while you have it apart. I have to do the touch control, brakes, water pump. And pull the steering gear box apart. There is a clip on top of the top bearing on the gear sector shaft. Which I think is missing on the new 130. The steering is tight but if the wheels are hard to turn then I have some drift it the steering.
Billy
Take care of your equipment and it will take care of you. 1964 cub. Farmall 100 and 130.
"Those that say it can’t be done should not interrupt the ones who are doing it.”
"Those that say it can’t be done should not interrupt the ones who are doing it.”
-
- Similar Topics
- Replies
- Views
- Last post
-
-
Shims in the Transmission 140 Attachment(s)
by inairam » Tue Dec 13, 2022 7:11 am » in Farmall A, Super A, AV, 100, 130 & 140 - 15
- 349
-
by inairam
Wed Dec 21, 2022 7:02 am
-
-
-
140 Transmission Oil Level
by workinonit » Sun Mar 24, 2024 7:03 am » in Farmall A, Super A, AV, 100, 130 & 140 - 6
- 153
-
by workinonit
Mon Mar 25, 2024 12:21 pm
-
-
-
SA To 140 Transmission Swap
by F.POLLIO » Sun Apr 10, 2022 9:44 am » in Farmall A, Super A, AV, 100, 130 & 140 - 8
- 292
-
by F.POLLIO
Sun Apr 10, 2022 4:43 pm
-
-
-
PTO versus transmission in gear... Attachment(s)
by cheapohubby » Tue Oct 17, 2023 3:47 pm » in Farmall A, Super A, AV, 100, 130 & 140 - 8
- 1035
-
by inairam
Sat Oct 21, 2023 1:32 pm
-
-
-
Farmall A transmission question
by mcwinter » Thu Apr 25, 2024 9:06 am » in Farmall A, Super A, AV, 100, 130 & 140 - 4
- 116
-
by SONNY
Fri Apr 26, 2024 12:26 pm
-
Return to “Farmall A, Super A, AV, 100, 130 & 140”
Who is online
Users browsing this forum: No registered users and 1 guest