My cousin has a 140 that his Dad (my Uncle) bought new. It's always been in the family and he uses's it for plowing since his Dad passed away about 5 years ago. He told me today it never ran just right but wasn't bad either. Lately it had gotten worse and finally quit running. He did a little work and found that 4 of the pushrods were badly bent. He needs to replace them but hasn't had any luck finding any. Anyone have a good source or even a few to spare from a parts machine?
Thanks
Ron
He did say it was the 4 cyl engine a 122 I believe.
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
140 parts
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- Cub Pro
- Posts: 3421
- Joined: Fri Sep 24, 2004 9:02 pm
- Zip Code: 30543
- Tractors Owned: 1948 Cub
- Circle of Safety: Y
- Location: Ga. Gillsville
140 parts
I bought an old tractor all dusty and worn,
knew nothing about her just the year she was born
I washed her and greased her and painted her red
Now she lives happily right here in my shed.
HOME of THE STONETHROW CUBFEST
2007 Cub Tug Champion
knew nothing about her just the year she was born
I washed her and greased her and painted her red
Now she lives happily right here in my shed.
HOME of THE STONETHROW CUBFEST
2007 Cub Tug Champion
-
- 10+ Years
Re: 140 parts
I have a handfull i can send ya Ron. PM me your address.
Dale
Dale
-
- Cub Pro
- Posts: 3421
- Joined: Fri Sep 24, 2004 9:02 pm
- Zip Code: 30543
- Tractors Owned: 1948 Cub
- Circle of Safety: Y
- Location: Ga. Gillsville
Re: 140 parts
PM sent, Thanks Dale
I bought an old tractor all dusty and worn,
knew nothing about her just the year she was born
I washed her and greased her and painted her red
Now she lives happily right here in my shed.
HOME of THE STONETHROW CUBFEST
2007 Cub Tug Champion
knew nothing about her just the year she was born
I washed her and greased her and painted her red
Now she lives happily right here in my shed.
HOME of THE STONETHROW CUBFEST
2007 Cub Tug Champion
-
- 10+ Years
Re: 140 parts
Ron, I may have messed up responding late at night. I have some out of an A block. I also have a parts C i was going to pull some from.
Then I remembered the C has an A block (113?) as they took the C block and put it in my A.
Now if you are not confused, you are better off than i am, 'cause I can't keep it straight.
If someone knows if these will work, I am glad to send them. Otherwise they are going to China and coming back as tin cans.
Dale
Then I remembered the C has an A block (113?) as they took the C block and put it in my A.
Now if you are not confused, you are better off than i am, 'cause I can't keep it straight.
If someone knows if these will work, I am glad to send them. Otherwise they are going to China and coming back as tin cans.
Dale
-
- Team Cub
- Posts: 17279
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
Re: 140 parts
There are at least 3 different part numbers on the push rods for the 113/123 engines. The C and Super A parts catalogs list all 3 parts as interchangeable. So you may be able to see some differences between them, but they interchange.
-
- 10+ Years
Re: 140 parts
I will send them Ron, if they are the right length, they should work, if not, he can send them to China for me.
-
- Cub Pro
- Posts: 3421
- Joined: Fri Sep 24, 2004 9:02 pm
- Zip Code: 30543
- Tractors Owned: 1948 Cub
- Circle of Safety: Y
- Location: Ga. Gillsville
Re: 140 parts
Thanks Dale and Jim, we'll either fix his 140 or make tin cans
I bought an old tractor all dusty and worn,
knew nothing about her just the year she was born
I washed her and greased her and painted her red
Now she lives happily right here in my shed.
HOME of THE STONETHROW CUBFEST
2007 Cub Tug Champion
knew nothing about her just the year she was born
I washed her and greased her and painted her red
Now she lives happily right here in my shed.
HOME of THE STONETHROW CUBFEST
2007 Cub Tug Champion
-
- Similar Topics
- Replies
- Views
- Last post
-
-
Farmall A to 140 parts
by 1978cub » Fri May 27, 2022 6:29 am » in Farmall A, Super A, AV, 100, 130 & 140 - 2
- 199
-
by Jim Becker
Fri May 27, 2022 11:03 am
-
-
-
Freeing rusted parts
by customcutter » Mon Apr 10, 2023 2:54 pm » in Farmall A, Super A, AV, 100, 130 & 140 - 4
- 227
-
by inairam
Wed Apr 12, 2023 11:11 am
-
-
-
Keep finding old tractor parts in my yard
by JamoJack » Sun Mar 27, 2022 8:30 pm » in Farmall A, Super A, AV, 100, 130 & 140 - 1
- 265
-
by Eugene
Mon Mar 28, 2022 7:05 am
-
-
-
IH 140 Fast Hitch Parts - VS - Other IH Tractors?
by gitractorman » Wed Jun 30, 2021 9:39 am » in Farmall A, Super A, AV, 100, 130 & 140 - 4
- 527
-
by inairam
Thu Jul 01, 2021 8:33 am
-
-
-
Super A cultivator parts and setup
by timtires » Mon Apr 03, 2023 10:46 am » in Farmall A, Super A, AV, 100, 130 & 140 - 5
- 937
-
by customcutter
Fri Apr 14, 2023 9:11 am
-
Return to “Farmall A, Super A, AV, 100, 130 & 140”
Who is online
Users browsing this forum: No registered users and 2 guests