Super C slow Hydrualics

[dirt devil]

I have a friend that has his dad's Super C with a fast hitch. However the fast hitch goes down really really slow. I have not had a chance to look at it yet but I will take a look this weekend, as I will be helping him with his Cub as well. He has a two bottom plow for the Super C and wants to use it but the plow takes so long to go down he wont use it. I was wondering if anyone knew of any "known" issues with screens or such that you could advise me on. I also plan to take a look at the linkages and make sure that everything is tight and not loose or sloppy.

Thanks

[John *.?-!.* cub owner]

They use a retarder circuit similar to a cub, I would suspect dirt in the orifice. Or the wrong fluid.

[dirt devil]

John

I am agreeing with you, sounds like something is plugged up or bad fluid or lack there of. I have another question, where is the orfice located on the Cub, I have never had the TC apart so I really don't know where to look.

Thanks

[John *.?-!.* cub owner]

I don't remember just offhand, and not handy to a manual, but if you look on the manual server it is in the parts books, and also look under the Blue Ribbon manual section for the Touch Control manual.