Wanted: Farmall C rear-end photos.

[havoc1482]

I'm looking to get some photos of the rear end/final drives of the Farmall C. I'm going to be working on one soon and would like to have some images so I can show my boss what hes getting into before he pulls everything apart. Bullgear assembly would be very much appreciated.

If nobody can scrounge up any photos thats fine! I can do without them, but my boss and I are visual people haha

[Jim Becker]

The exploded diagrams from the parts catalog will probably show you more than any pictures will. If you don't have the catalog, go to http://partstore.caseih.com/us/ and put "Farmall C" into "find parts by model".

[havoc1482]

The CaseIH partstore diagrams were my first and obvious choice. They don't provide an accurate or realistic depiction of the end of the bullgear inside the differential housing, which is why I made this post in the first place.

[64/67lo-boy]

I was reading an older post of sombody removing an axle from a C and they said they accessed the retaining cap by removing the PTO cover, no internall pictures were shown.

(Edit) They also cautioned that if the axle is to be taken out of the center of the bull gear then go through the top of the trans. Reassembly will be less frustraiting. Easier to get the gear back up on to the shaft.

[Dixonsc]

Bull gears on super c

[Steve-N-Tn]

Mike--from another forum but maybe you can get an idea of what all is involved, Hope this helps!!

http://www.yesterdaystractors.com/cgi-b ... &th=902891

[64/67lo-boy]

Bull Gears on a Super C
Axle from 1950 C
pictures from YT

[Dixonsc]

http://s76.photobucket.com/user/jaleigh ... sort=3&o=0