This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy

NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.

504 steering

All other non-specific model Farmall / IH / CASE tractors. (Catch-All)
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
My504
Posts: 1
Joined: Sat Oct 03, 2020 7:45 pm
Zip Code: 18657

504 steering

Postby My504 » Sat Oct 03, 2020 8:01 pm

Hi guys, new to your forum. Would any of you guys know which way to install an oil cooler relief valve on a Farmall 504 gas?
I currently have the hand pump out and will be replacing the end cap. I was told to mark and remove the 3" piece of line under the steering column and look to see if it has a ball in it. Of course mine had nothing and could see right through. Looks like someone just replaced it with a piece of line. So I don't know which way to put my replacement.
Maybe even if someone knows which way the fluid goes I may be able to figure it out. Thanks
Top

Return to “Farmall / IH / CASE”

Who is online

Users browsing this forum: No registered users and 0 guests