Need help on identifying this tractor

[jc-ih]

Jim,

The loader is attached to front frame..not the axle..and casting number on block is 3 055 003 R3..I also attached photo below

[jc-ih]

[jc-ih]

If someone have a similar tractor, please help to share the information of model number...it need a lot work on it but before I start I need to confirm the model number.

[Don McCombs]

Definitely no 1 there.

[jc-ih]

Don.,
Yes..there no "1"...but what is your guess..if there was a "1"

[tst]

that is the casting # for the block, keep looking for a serial # probably stamped in the block

[jc-ih]

Thanks Tst..I will look for tomorrow..

[Jim Becker]

The block part number doesn't help much. I think it means it is a D-239 engine. That should be cast in somewhere, maybe the hidden numbers just below the part number. Diesel? 4 cylinder? How many speeds in the main transmission? Hi-Lo? Reverser? Torque converter?

[jc-ih]

Jim,
I will look again tomorrow for engine model number..
It is a diesel, 4 cycles, I think..8 speed with Hi-Lo..and one Revere...(not sure on transmission since previous owner do not know anything about the tractor..)

[Don McCombs]

Don.,
Yes..there no "1"...but what is your guess..if there was a "1"

The 2544 serial numbers started at 10250, so it can't be that model.

[indy61]

International 3514?

https://www.google.com/search?q=interna ... 66&bih=635

[Don McCombs]

That looks like a winner!

[Dale Finch]

So what's his prize??!!

[Jim Becker]

3514 is getting into the right series/age tractor. However, my reference shows the 3514 with a D-188 engine, not a D-239.

[indy61]

TractorData.com shows the D-188 engine was used on early 3514's and the D-239 was used beginning with tractor serial number 1695. I don't know if that is correct or not.

https://www.tractordata.com/industrial- ... ngine.html