This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Farmall 200
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 2338
- Joined: Sat Apr 10, 2004 6:12 pm
- Zip Code: 40218
- Circle of Safety: Y
- Location: KY, Louisville
Farmall 200
Can someone tell me what the Owners/Operator Manual specifies to use as the lubricant in the transmission/rear-end of a Farmall 200, and the quanity. Thanks in advance.
-
- Team Cub
- Posts: 17291
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
Re: Farmall 200
I don't have a reference for the 200. It was in the middle of the succession of similar models C - Super C - 200 - 230 - 240 - 404. The early ones would have been factory filled with SAE 90 gear oil and the later ones with Hy-Tran. I don't know whether the switch was done by the time the 200 came along. Since the 200's Touch-Control had a separate reservoir, the transmission would be OK with either type. For the 240, the book calls out 4 3/4 gallons of Hy-Tran without PTO/pulley, 5 gallons with. The 200 would have to be close to the same. The level plug is on the right side, at the very rear.
Return to “Farmall / IH / CASE”
Who is online
Users browsing this forum: No registered users and 0 guests