This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
cub restoration on hold
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 916
- Joined: Sun Apr 08, 2007 7:47 pm
- Zip Code: 47631
- Tractors Owned: 1955 Cub w/9 different 1 point implements
1948 Cub
1948 McCormick W-6
1949 H
1949 M
1961 560 w/ 412 fast hitch plow
1966 140
1973 666
Allis Chalmers C w/sickle mower
Case 400
Economy 14 hp tractor - Location: IN, New Harmony
cub restoration on hold
Well, I've made the decision to hold off on the restoration on my 1955 cub. I am beginning to gather parts to restore the tractor I learned to drive on, my grandfather's 1961 Farmall 560. It needs a lot of work (complete engine rebuild, new T/A and new tires to name a few. This project will take at least 2 years for me to complete. I will try to give updated photos as I progress, but they will be few as I am now just starting to gather parts. Here is what I have to start with.
-
- Team Cub Mentor
- Posts: 24144
- Joined: Sun Feb 02, 2003 12:50 pm
- Zip Code: 43113
- Circle of Safety: Y
- Location: OH, Circleville
Re: cub restoration on hold
Brian - I spent many hours on a 560 Diesel. I loved looking down that long hood from the operator's seat!
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
-
- 10+ Years
- Posts: 4587
- Joined: Mon Apr 17, 2006 9:17 pm
- Zip Code: 65626
- Tractors Owned: 1949 Cub "Frodo"
1949 Cub "Sam" (future Project)
1965 Lo-Boy "Pippin"
1940 H "Walter"
1953 SC "Gimli"
Cub Cadet HDS 2155 - Circle of Safety: Y
- Location: MO, Bakersfield, (South - Central)
Re: cub restoration on hold
Brian, sounds like you have quite a project ahead of you. Good luck and can't wait to see the pictures as you make progress.
Vince
High atop Hummingbird Hill
In the Missouri Ozarks
High atop Hummingbird Hill
In the Missouri Ozarks
-
- 10+ Years
- Posts: 7703
- Joined: Thu Aug 19, 2004 2:31 pm
- Zip Code: 10314
- Location: NY Staten Island & Franklin
Re: cub restoration on hold
Lots of luck with it.
Bill
"Life's tough.It's even tougher if you're stupid."
- John Wayne
" We hang petty thieves and appoint the great ones to public office."
- Aesop
"Life's tough.It's even tougher if you're stupid."
- John Wayne
" We hang petty thieves and appoint the great ones to public office."
- Aesop
-
- 10+ Years
- Posts: 6547
- Joined: Mon Jul 25, 2005 10:16 pm
- Zip Code: 61944
- Tractors Owned: -
55 F-Cub - snow plow and chains
3 Demonstrators Restored.
"Bette" - 22 mower
"Roxie" - 144 Complete Cults'
"Sandy"(Done) 193 Plow
1950 Demo, "Billie"
-(Woods 59")
Corn Stalk Cutter
23a Disc
&
2005 Mahindra w/FEL - Circle of Safety: Y
- Location: IL, Paris just off of Interstate 70
Re: cub restoration on hold
Good luck Brian. I too, got many hours behind the wheel of a 560. Raking hay, plowing and such.
-
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
Re: cub restoration on hold
Have fun Brian. Be sure to check the rear axle inner bearing. They were a problem, would go bad and the bull gear would rub a hole in the bottom of the case.
If you are not part of the solution,
you are part of the problem!!!
you are part of the problem!!!
-
- 10+ Years
- Posts: 109
- Joined: Fri Jan 06, 2006 3:50 pm
- Location: IN, Seymour
Re: cub restoration on hold
Brian, that's a nice looking original set up, of course the memories are priceless. I would like to have just 1 of the tractors back that Grandpa had when I was a kid. I saw a 412 plow like that on an auction last fall. It had that same rear transport wheel. I'd never seen one like that before.
"that'll take the mule out of the melon patch!" Bub Baker
-
- 10+ Years
- Posts: 916
- Joined: Sun Apr 08, 2007 7:47 pm
- Zip Code: 47631
- Tractors Owned: 1955 Cub w/9 different 1 point implements
1948 Cub
1948 McCormick W-6
1949 H
1949 M
1961 560 w/ 412 fast hitch plow
1966 140
1973 666
Allis Chalmers C w/sickle mower
Case 400
Economy 14 hp tractor - Location: IN, New Harmony
Re: cub restoration on hold
Well, here is the first update. These may not be the most important items, but at least it gives me something to look at.
These are original emblems that have been restored. They are not the same ones pictured in the "before picture", but what a difference! I didn't notice until I was resizing the pictures that I got my fingerprints on the refurbed emblems.
These are original emblems that have been restored. They are not the same ones pictured in the "before picture", but what a difference! I didn't notice until I was resizing the pictures that I got my fingerprints on the refurbed emblems.
Return to “Farmall / IH / CASE”
Who is online
Users browsing this forum: No registered users and 1 guest