Hi all,
Fairly new to tractors and just bought a Farmall 350. Was brush hogging with it for a few hours last week and it started sputtering. I took intake pipe off and gas was coming out. I rebuilt carb and now no spark. I ordered new condenser and points. Rotor looked good I cleaned it up a bit. Checked ohms on coil was around 3 ohms. I do not have a spark tester yet but I pulled a plug and put it on engine but did not see a spark. Hope its condenser/points. Any other things I should be looking for? I did have 12v to coil
Thanks
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
New Farmall 350 owner
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- Posts: 3
- Joined: Thu Jan 04, 2024 1:55 pm
- Zip Code: 52565
Re: New Farmall 350 owner
Don't know if the condenser fixed it, hopefully it did???
I just got done fighting a coil that would get weak as it was running
I just got done fighting a coil that would get weak as it was running
-
- Similar Topics
- Replies
- Views
- Last post
-
- 2
- 1096
-
by LedgeFinder
Thu Nov 11, 2021 10:20 pm
Return to “Farmall H, HV, Super H, 300 & 350”
Who is online
Users browsing this forum: No registered users and 0 guests