Farmall H, HV & Super H, 1939-1954
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds
or one of our site sponsors for your tractor and parts needs.
Tue Apr 08, 2008 12:56 pm
I was wondering if their are different IH oil pressure gauges. I have a 1945 H and I bought a new oil pressure gauge for it.
The previous owner swapped gauges just before I bought it because the old gauge was broke. The gauge he put on it and the one that I bought new are both indicating pegged on the high side. I haven't tried a regular pressure gauge yet to see exactly how much pressure I have. I was just wondering if I had the wrong gauges or if I have some kind of problem internally. Also does anyone know what the normal operating pressure should be?
Tue Apr 08, 2008 9:00 pm
Bypass spring may be sticking, but if it was recently overhauled and crank ground it may run pretty high for a while.
Tue Apr 08, 2008 9:28 pm
I&T manual IH-8 says the oil pressure on the H is 60 to 70 lbs.
My guess is you have the wrong oil pressure guage. Valubilt lists 3 different oil pressure guages for IH tractors plus one universal guage. The advertised guages list the max oil pressure at 45 psi. One guage does not list the pressure and it's for the A, B, C, and Cub -- A, B, C (60 psi) Cub (30 - 35 psi).
Wed Apr 09, 2008 3:31 pm
Thanks guys! I guess I've got to dig into it further and find out what's going on.
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.