This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Need help 54 super m
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 5+ Years
- Posts: 2
- Joined: Thu Oct 20, 2016 7:46 pm
- Zip Code: 97624
Need help 54 super m
Hy I have a 54 farmall IH super M it sat for about a year. The problem being the right rear spindle is locked up.I read about the bearing may be sized. Never had this problem dont know where to start?
- Super A
- 10+ Years
- Posts: 5228
- Joined: Mon Jan 26, 2004 10:53 am
- Zip Code: 28521
- Tractors Owned: Collector of Super As, Corn Pickers, and a buncha other junk. Even a Cub now and then...
- Circle of Safety: Y
- Location: NC, Jacksonville area
Re: Need help 54 super m
As in the rear axle? Check the brakes.
Al
Al
White Demo Super A Restoration Updates
Let us pray for farmers and all who prepare the soil for planting, that the seeds they sow may lead to a bountiful harvest.
Celebrating 75 years of the Super A: 1947-2022
Let us pray for farmers and all who prepare the soil for planting, that the seeds they sow may lead to a bountiful harvest.
Celebrating 75 years of the Super A: 1947-2022
-
- 5+ Years
- Posts: 2
- Joined: Thu Oct 20, 2016 7:46 pm
- Zip Code: 97624
Re: Need help 54 super m
three out of four tires move. I do believe that the brake is off I have set and released it
- John *.?-!.* cub owner
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
Re: Need help 54 super m
Assuming it has disk brakes, they used a ball in a slot that rolled back and forth to activate and release brakes. They were bad to get rusty and stick in place, either in the released or locked position. Pull the brake cover on the side that is not rolling and see what happens. I have never worked on disk brakes for a Super M, but I believe the rotor has to be free to slide on the shaft, and if it sticks will cause the brake to not release.
If you are not part of the solution,
you are part of the problem!!!
you are part of the problem!!!
- Super A
- 10+ Years
- Posts: 5228
- Joined: Mon Jan 26, 2004 10:53 am
- Zip Code: 28521
- Tractors Owned: Collector of Super As, Corn Pickers, and a buncha other junk. Even a Cub now and then...
- Circle of Safety: Y
- Location: NC, Jacksonville area
Re: Need help 54 super m
I have had the brakes on the 230 lock a time or two, (same as Super M just smaller) and putting it in reverse would unlock them.
Al
Al
White Demo Super A Restoration Updates
Let us pray for farmers and all who prepare the soil for planting, that the seeds they sow may lead to a bountiful harvest.
Celebrating 75 years of the Super A: 1947-2022
Let us pray for farmers and all who prepare the soil for planting, that the seeds they sow may lead to a bountiful harvest.
Celebrating 75 years of the Super A: 1947-2022
-
- Posts: 4
- Joined: Fri Jun 28, 2019 10:09 am
- Zip Code: 65722
Re: Need help 54 super m
I replaced my disc brakes on my super m found a place that had shelves of old used ones that were in good shape and bought new pads. The old ones had rusted up and seized
Return to “Farmall M, Super M, 400, 450, & 560”
Who is online
Users browsing this forum: No registered users and 2 guests