This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link:
Privacy Policy

NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.

Clutch not working

IHC Cub Cadet Forum -- Questions and answers to all of your Cadet related issues.
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Tractor Rod
Cub Star
Cub Star
Posts: 106
Joined: Sun Dec 27, 2020 10:48 am
Zip Code: 67357

Clutch not working

Postby Tractor Rod » Sat Sep 02, 2023 7:23 pm

I brought home a Cub Cadet pictured below and used it for about an hour and then parked. The next time I went to start it, the clutch would not engage and just grinder the gears. I’ve checked clutch rod linkage and it’s still intact and don’t know what the problem might be……..any thoughts would help. I have attached pictures below because there’s no model number on it for a reference. Thanks advance for your assistance.
Attachments
IMG_3499.jpeg
IMG_3499.jpeg (84.97 KiB) Viewed 1560 times
IMG_3499.jpeg
IMG_3499.jpeg (84.97 KiB) Viewed 1560 times
IMG_3498.jpeg
IMG_3498.jpeg (57.79 KiB) Viewed 1560 times

Eugene
Team Cub Mentor
Team Cub Mentor
Posts: 20379
Joined: Fri Jul 02, 2004 9:52 pm
Zip Code: 65051
Circle of Safety: Y
Location: Mo. Linn

Re: Clutch not working

Postby Eugene » Sat Sep 02, 2023 9:39 pm

The rod you are showing attaches to the pedal on the left side of the tractor is for clutch and brakes. The clutch is located directly behind the engine.

Use the model number for manuals. Operators, service, and parts manuals are on the internet. The model number is going to be one of the early Cub Cadets with a manual transmission.

Owning a 105 and a 125, the clutch is not hard to work on. Parts are available on the internet or your local Case IH dealership. Internet is much less expensive

Edit: Sorry. Cubs model number ending with a 5 are hydrostat. Also own two Cub Cadets with a manual transmission.
Last edited by Eugene on Sun Sep 03, 2023 2:17 pm, edited 1 time in total.
I have an excuse. CRS.

getitrunning
Cub Star
Cub Star
Posts: 90
Joined: Wed Jun 16, 2021 5:41 pm
Zip Code: 37881
Tractors Owned: Farmall Cub 1948 w mower
Farmall Cub 1949
super A w/cultivators
super A w/woods 59
cub low boy 154
cub cadet 1864
Yanmar 1500D
Belarus 525
Ford 4000 1962 Diesel
Location: East TN

Re: Clutch not working

Postby getitrunning » Sun Sep 03, 2023 11:25 am

my yanmar clutch sticks like that sometimes. with engine running and transmission in neutral I stomp on the clutch pedal a bunch of times and quite often it frees it up. next time this happens I will rev the engine with pedal depressed and not depressed to get the clutch to spin real good and hopefully free up what had been sticking.

Tractor Rod
Cub Star
Cub Star
Posts: 106
Joined: Sun Dec 27, 2020 10:48 am
Zip Code: 67357

Re: Clutch not working

Postby Tractor Rod » Mon Sep 04, 2023 9:00 pm

Thanks to both of you for helping. I have spent everal hours on the internet trying to figure out my model and year. None of the pictures match the look of mine and I’m guessing it is a Model 73 made in 1970 from the numbers I’m trying to cross reference. I’m attaching every number I can find on this cub cadet in hopes someone much smarter then I am can help me out so I can order the right clutch. Thanks in advance for any help you can offer!
Attachments
IMG_3588.jpeg
IMG_3588.jpeg (33.96 KiB) Viewed 1503 times
IMG_3592.jpeg
IMG_3592.jpeg (42.58 KiB) Viewed 1503 times
IMG_3595.jpeg
IMG_3595.jpeg (39.68 KiB) Viewed 1503 times
IMG_3598.jpeg
IMG_3598.jpeg (45.38 KiB) Viewed 1503 times
IMG_3506.jpeg
IMG_3506.jpeg (47.36 KiB) Viewed 1503 times
IMG_3506.jpeg
IMG_3506.jpeg (47.36 KiB) Viewed 1503 times

Tractor Rod
Cub Star
Cub Star
Posts: 106
Joined: Sun Dec 27, 2020 10:48 am
Zip Code: 67357

Re: Clutch not working

Postby Tractor Rod » Mon Sep 04, 2023 9:06 pm

One more number on the side of the tractor…. I am really confused!

Thanks.

(I turn 70 on Sept 25 so maybe I should chalk it up to my age and being too old to figure this out!!!!)
Attachments
IMG_3588.jpeg
IMG_3588.jpeg (33.96 KiB) Viewed 1503 times
IMG_3591.jpeg
IMG_3591.jpeg (72.79 KiB) Viewed 1503 times

Bob McCarty
Team Cub
Team Cub
Posts: 11862
Joined: Tue May 25, 2004 8:02 pm
Zip Code: 80501
Tractors Owned: Cubs, MH Pony, Shaw, Allis G, 1934 Silver King, JD LA and LI, Gibson D, David Bradley Tri-Trac
Circle of Safety: Y
Location: CO, Longmont

Re: Clutch not working

Postby Bob McCarty » Mon Sep 04, 2023 9:25 pm

In looking up the Kohler sn, it's a 1974 unless the engine was changed out....
"We don't need to think more,
we need to think differently."
-Albert Einstein

User avatar
dgrapes59
10+ Years
10+ Years
Posts: 3736
Joined: Sun Jul 13, 2008 10:05 pm
Zip Code: 45067
Tractors Owned: 1951 Cub, 2-1955 Loboy w FH, a few plows, discs, mowers, blades, carrier & such
Several '61 CC Originals, Cub Cadet 100, several 102's & 122's, 124, various CC options & implements, #1Trailer, 1963 Springfield, JD 770, Ford 8N
Circle of Safety: Y
Location: OH, Trenton

Re: Clutch not working

Postby dgrapes59 » Mon Sep 04, 2023 9:27 pm

It's not a 73, it's the first model, commonly called "Original", made 1961-1963. This, and other helpful information, was posted on your other thread. The engine, K161, is a 7hp.
Hang in there!
David

User avatar
dgrapes59
10+ Years
10+ Years
Posts: 3736
Joined: Sun Jul 13, 2008 10:05 pm
Zip Code: 45067
Tractors Owned: 1951 Cub, 2-1955 Loboy w FH, a few plows, discs, mowers, blades, carrier & such
Several '61 CC Originals, Cub Cadet 100, several 102's & 122's, 124, various CC options & implements, #1Trailer, 1963 Springfield, JD 770, Ford 8N
Circle of Safety: Y
Location: OH, Trenton

Re: Clutch not working

Postby dgrapes59 » Mon Sep 04, 2023 9:30 pm

Tractor Rod, check out your other post:

viewtopic.php?f=2&t=115658&p=921384#p921384
David

User avatar
dgrapes59
10+ Years
10+ Years
Posts: 3736
Joined: Sun Jul 13, 2008 10:05 pm
Zip Code: 45067
Tractors Owned: 1951 Cub, 2-1955 Loboy w FH, a few plows, discs, mowers, blades, carrier & such
Several '61 CC Originals, Cub Cadet 100, several 102's & 122's, 124, various CC options & implements, #1Trailer, 1963 Springfield, JD 770, Ford 8N
Circle of Safety: Y
Location: OH, Trenton

Re: Clutch not working

Postby dgrapes59 » Mon Sep 04, 2023 9:41 pm

The serial number location. :wink:

Screenshot_20230904-223829_Google.jpg
David

Tractor Rod
Cub Star
Cub Star
Posts: 106
Joined: Sun Dec 27, 2020 10:48 am
Zip Code: 67357

Re: Clutch not working

Postby Tractor Rod » Tue Sep 05, 2023 7:13 am

Thanks to all for your help!!!!


  • Similar Topics
    Replies
    Views
    Last post

Return to “Cub Cadet”

Who is online

Users browsing this forum: No registered users and 2 guests