Cub Cadet 108 Attachment Parts and Service Manuals

[Rudi]

Guys:

My buddy Gord needs these manuals for his CC 108.

QA36A Snow Thrower : Parts Manual, Service Manual

441U1111 Mower Deck: Parts Manual, Service Manual

Any help would be appreciated..

[jostev]

Rudi, did you check ihregistry

Johnny

[Bruce Sanford]

Rudi

Gord can get all the manuals from Binder a well. Bruce

[wdeturck]

http://www.cngcoinc.com/parts-browse.asp has all the parts list available to check parts for any Cub Cadet and/or accessories when you learn to navigate through it. It will also let you know if the part is available and if it is the price and then you can order it and have it shipped to you.

[R Bedell]

Rudi:

For the Service Manuals, you will need GSS-1497. Section 3 covers the attachments you are interested in.

As for parts, the CPE-2 Parts Manual covers the parts for your attachments.

NEITHER of these manuals are available on the Registry.

These are available at Binders Books (http://www.binderbooks.com)

[Paul B]

Both parts listings are in the CPE-2 parts manual and are only a couple pages each. I have a Operator and Set up manual for a QA-36, QA 42 Snow Thrower which will be a little different than for the QA 36A (adjustable mount for one thing), but would give him basic information. Both operator manuals are on the IH Registry.

[Rudi]

Paul:

I have the Operators and Setup Manuals, it is the Service and the Parts Manuals for the Implements that we do not have.

Would it be possible to get some of your top notch scans on those pages from the CPE-2 that apply to the Snow Thrower and to Gord's particular deck?

I will in the mean time try to find the Service Manual for the 108 and for the Implements..

Thanks

[Paul B]

Rudi
I will try to get them scanned in the next day or two. The service manual that covers the 108, GSS-1464 (also covers all the wide frame and Quietline series tractors) has some service information on both the deck and the snow thrower, although for the ST it only covers the right angle gear box and states it "is the only assembly that requires servicing information". Look on the registry site under manuals, then under snow throwers for the QA-36A and under mower decks you will find 44-50" decks, and you should find your deck. That deck was built in 1973 & 74.

[Paul B]

Rudi
Did you get your scans, or did they get "hung up in cyber Customs" ?

[dyt4000]

That service manual is already "scanned" in as a PDF.

http://ihregistry.com/manuals/86ser.zip