This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
On-line Manuals for 1250 Cub Cadet
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 405
- Joined: Wed Jan 09, 2008 6:43 pm
- Zip Code: 04416
- Tractors Owned: 1940 Farmall A, 1946 David Bradley,1948 F-Cub,Cub 22 Mower,194 Plow,Cub 3 Cultivator,54A Grader/Snow Blade, A-Cub 33 Bean Harvester
- Location: Bucksport,Me. 04416
On-line Manuals for 1250 Cub Cadet
Are there any sources for on-line manuals for Cub Cadets? I have a Cub Cadet 1250 and I'm trying to find out how the engine side panels connect to the tractor.
-
- 10+ Years
- Posts: 82
- Joined: Sun Jul 11, 2010 10:31 am
- Zip Code: 18092
- eBay ID: jrd77vet
- Tractors Owned: Cub Cadet 122
Cub Cadet 125 - Location: PA, Zionsville
Re: On-line Manuals for 1250 Cub Cadet
Look in here
http://www.ccmanuals.info/pdf/
Is a 1210 close enough? ( I'm a narrow frame guy )
http://www.ccmanuals.info/pdf/1210-1810 ... Manual.pdf
Jeff
http://www.ccmanuals.info/pdf/
Is a 1210 close enough? ( I'm a narrow frame guy )
http://www.ccmanuals.info/pdf/1210-1810 ... Manual.pdf
Jeff
-
- 10+ Years
- Posts: 2338
- Joined: Sat Apr 10, 2004 6:12 pm
- Zip Code: 40218
- Circle of Safety: Y
- Location: KY, Louisville
Re: On-line Manuals for 1250 Cub Cadet
The bottom "lip" hooks inside the top of the frame rails, at the top rear of each panel is a hole for a bolt (was originally a bolt with a wing nut head for lack of a better discription) that screws into the side of the dash pedestal. At the front, there are tabs on the top of each side panel and a spring hooks into each panel (from panel to panel) holding them tight to the grill frame. The spring looks like a short screen door spring with a long end on one end.
-
- 10+ Years
- Posts: 405
- Joined: Wed Jan 09, 2008 6:43 pm
- Zip Code: 04416
- Tractors Owned: 1940 Farmall A, 1946 David Bradley,1948 F-Cub,Cub 22 Mower,194 Plow,Cub 3 Cultivator,54A Grader/Snow Blade, A-Cub 33 Bean Harvester
- Location: Bucksport,Me. 04416
Re: On-line Manuals for 1250 Cub Cadet
Thanks for the information regarding the side panels.Just trying to gather parts before tearing everything apart. The other concern I have is that the hydrostatic drive doesn't stay where you set it. I've read where there is wear in the linkage to the transmission that causes this
-
- Similar Topics
- Replies
- Views
- Last post
-
-
My First Cub Cadet. 1982 Cub Cadet 1282 Attachment(s)
by AntiqueTractorFan » Thu Jan 26, 2023 10:25 pm » in Cub Cadet - 0
- 1263
-
by AntiqueTractorFan
Thu Jan 26, 2023 10:25 pm
-
-
- 3
- 1425
-
by 790rivers
Tue Jun 22, 2021 1:50 pm
-
- 16
- 2565
-
by BigBill
Sun Jul 18, 2021 11:47 pm
-
- 2
- 614
-
by SamsFarm
Tue May 11, 2021 6:54 pm
-
- 2
- 1244
-
by BigBill
Thu Jun 10, 2021 1:52 pm
Who is online
Users browsing this forum: No registered users and 0 guests