This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Tie Rods or something
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 99
- Joined: Tue Feb 21, 2012 11:02 pm
- Zip Code: 19520
- Tractors Owned: 1948 Farmall Cub
2007 Cub Cadet
Tie Rods or something
On my 1554, the front wheels are pointed in at least 10 degrees and have a lot of play. It seems flimsy to begin with, but I'm wondering if I'm missing a stablizing part or something. Is there something in addition to the tie rods to maintain alignment? Are the tie rods known to bend?
-
- 10+ Years
- Posts: 2680
- Joined: Mon Oct 24, 2005 11:35 am
- Zip Code: 14072
- eBay ID: toysforjake
- Tractors Owned: Lots of Cub Cadets!
1951 Farmall Cub
1977 IH Cub
1966 IH Cub
1965 IH Lo Boy
1964 IH Lo Boy
1949 Farmall Cub
Several IH 154 Lo Boys
1979 IH 184 Lo Boy
Simplicity 4416 Sovereign
Simplicity Conquest
Simplicity Legacy 4x4 Diesel
Mitsubishi MT180D 4x4 Diesel - Circle of Safety: Y
- Location: Grand Island, NY
Re: Tie Rods or something
The tie rods (more specifically the tie rod ends) are the only things that control the alignment on the tractor. Yes, they can bend easily, especially on the cheapo 1000 series tractors like the 1554. They are quite flimsy. There is no stabilizer. It's also quite easy to bend a spindle or even bend the axle, and this happens often if you've hit a hole in the yard or a tree. Could be a combination of things. Unfortunately, you'll probably have to disassemble the front end, and look for a bent or broken piece. Things should look uniform (left to right) but the only way to know may be buying a new tie rod to see what it is supposed to look like. This is what a dealer would do, only charge you $50 an hour for labor.
Also, double check the front wheel bushings. There are no bearings in 1000 series tractor front wheels, they are just nylon bushings. Those obviously are easy to wear out and could give you the same condition. I'd start by jacking up the front end and looking for play in the wheels themselves.
Good luck!
Also, double check the front wheel bushings. There are no bearings in 1000 series tractor front wheels, they are just nylon bushings. Those obviously are easy to wear out and could give you the same condition. I'd start by jacking up the front end and looking for play in the wheels themselves.
Good luck!
Cub Cadets 682, 1811, 1864, Simplicity Legacy XL 4x4 Diesel with FEL, 60" mower, 50" Tiller
-
- 10+ Years
- Posts: 99
- Joined: Tue Feb 21, 2012 11:02 pm
- Zip Code: 19520
- Tractors Owned: 1948 Farmall Cub
2007 Cub Cadet
Re: Tie Rods or something
Thanks for the info. i bought it used last year. Turn radius stinks and gets stuck easy, but it runs/cuts nice. If my wife could drive a lo-boy, that's what I'd have!
-
- 10+ Years
- Posts: 99
- Joined: Tue Feb 21, 2012 11:02 pm
- Zip Code: 19520
- Tractors Owned: 1948 Farmall Cub
2007 Cub Cadet
Re: Tie Rods or something
Turns out the tie rod was bent. No other damage that I could see. I don't know what it's supposed to look like, so I bent it to a point where it doesn't touch anything and allows me to align the wheels with some adjustment remaining. The entire steering system is flimsy and cheap. It would cost $10 in extra steel to make it better, but I guess that would take away money for the useless cup holder.
-
- Cub Pro
- Posts: 28706
- Joined: Sun Feb 02, 2003 8:37 pm
- Zip Code: E1A7J3
- Skype Name: R.H. "Rudi" Saueracker, SSM
- Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger - Circle of Safety: Y
- Twitter ID: Rudi Saueracker, SSM
- Location: NB Dieppe, Canada
Re: Tie Rods or something
Bill:
That sounds like my '92 Craftsman 12.5 Deluxe - Roper cheaped out on everything even the zirks - none on the US model but the Cdn model had them. Nylon bushings instead of bearings or even brass bushings... all to save $0.01 or $0.02/unit and increase profitability. Irritates me to think about it. I guess this is the reason why I jumped at the chance to get a IHCC 129. At least that puppy is built to last
gitractorman wrote:Also, double check the front wheel bushings. There are no bearings in 1000 series tractor front wheels, they are just nylon bushings. Those obviously are easy to wear out and could give you the same condition.
That sounds like my '92 Craftsman 12.5 Deluxe - Roper cheaped out on everything even the zirks - none on the US model but the Cdn model had them. Nylon bushings instead of bearings or even brass bushings... all to save $0.01 or $0.02/unit and increase profitability. Irritates me to think about it. I guess this is the reason why I jumped at the chance to get a IHCC 129. At least that puppy is built to last
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship
Who is online
Users browsing this forum: No registered users and 3 guests