I've got a 1975 1650 with a 50GT model 359 mower deck. The deck has been rebuilt but it hangs low on the left side. Looking at the mower manual, I appear to have 2 adjustable links on the deck, and I should have a non-adjustable link on the left as sitting on the mower. Does anyone have the dimensions for this link so I can make one, or are they still available?
Thanks,
Tom E.
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Non-adjustable lift link for 50GT deck
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 137
- Joined: Fri Jul 02, 2004 7:12 pm
- Zip Code: 49032
- Location: Centreville, MI. 49032
-
- 10+ Years
- Posts: 2680
- Joined: Mon Oct 24, 2005 11:35 am
- Zip Code: 14072
- eBay ID: toysforjake
- Tractors Owned: Lots of Cub Cadets!
1951 Farmall Cub
1977 IH Cub
1966 IH Cub
1965 IH Lo Boy
1964 IH Lo Boy
1949 Farmall Cub
Several IH 154 Lo Boys
1979 IH 184 Lo Boy
Simplicity 4416 Sovereign
Simplicity Conquest
Simplicity Legacy 4x4 Diesel
Mitsubishi MT180D 4x4 Diesel - Circle of Safety: Y
- Location: Grand Island, NY
Re: Non-adjustable lift link for 50GT deck
You can use the adjustable link just fine. No reason to switch to the fixed link, as it will actually hinder your ability to level the deck. Also, double check that the mower mule drive/hanger/subframe is not bent or broken. The cross bar often breaks at the weld near the rear hanger holes, and lets one side hang lower than the other. I just re-welded one last week as a matter of fact.
Cub Cadets 682, 1811, 1864, Simplicity Legacy XL 4x4 Diesel with FEL, 60" mower, 50" Tiller
-
- 10+ Years
- Posts: 137
- Joined: Fri Jul 02, 2004 7:12 pm
- Zip Code: 49032
- Location: Centreville, MI. 49032
Re: Non-adjustable lift link for 50GT deck
Gitractorman,
Thanks for the help. I'll check it out tomorrow.
Tom E.
Thanks for the help. I'll check it out tomorrow.
Tom E.
-
- Similar Topics
- Replies
- Views
- Last post
-
- 6
- 361
-
by SONNY
Sun Apr 07, 2024 9:24 am
Who is online
Users browsing this forum: No registered users and 3 guests