Split rear wheel weights farmall154

[JimCub48]

Has anyone ever seen a set of rear split wheel weights for a farmall 154 ,is so do they have a part #.

[Jim Becker]

I've never seen any split weights or a listing for them in any parts catalog.

You looking at the Craig's List ad from Wadena? I see he took new pictures but they are still too blurry to read the part number. I haven't been curious enough to contact him and ask what the number is. It appears likely they fit something IH.

[JimCub48]

Your right , I have tried to contact him but no response,I can't make out the part # either. I am curious because I have never seen anything in the parts catelog either. Maybe I will get a response to solve the mystery!!.

[BigBill]

Probably be affordable to pick up the 8.3x 24” turf tires and rims and use the standard #150 fcub weights, hamiltonbobs cubs ships them ups mounted. I got a set of 13,6-16 that way.

Or fit sonic tube in the rim with a plywood backing line the rim with plastic and pour cement. Have the threaded rod in place with the holes.

[JimCub48]

Got the part # 369509r1 ,not for cub ,they may fit but but designed for cub.

[Barnyard]

Fits International Tractor(s) Hydro 84, 200, 230, 240, 330, 340, 385, 404, 424, 444, 454, 460, 464, 484, 504, 544, 574, 584, 606, 674, 684, 784, 844

[Jim Becker]

Fits International Tractor(s) Hydro 84, 200, 230, 240, 330, 340, 385, 404, 424, 444, 454, 460, 464, 484, 504, 544, 574, 584, 606, 674, 684, 784, 844

I think this is overstating the applicability. I assume it is listed somewhere in the parts catalogs for each of those models. For example, the catalog for the200/230/240 has the part listed. But it is only for tractors with 24" (non-power adjust) rear wheels. That wheel was used on the International 240 Utility, but not the Farmall's 200, 230, or 240. The story is the same for a few other models I checked. So I think the weights fit tractors in this list only when or if equipped with 24" wheels. 24" wheels are not common for some of these models.

Note that the A through 140 models are not listed. However, the A weights fit some of the listed models with 24" wheels. So I would assume these weights would fit the A/140s. Since A weights can be put on a Cub with some difficulty, I would guess you could bolt them on a Cub with the same problems and probably a bit more trouble since two separate halves won't self-center on a wheel disk.

At his price ($150), they are probably reasonably priced but not a huge bargain.

[BigBill]

I seen the A rear wheel weights on fcub. I have the A and fcub rim centers here but I haven’t matched them up yet. I need to mount my 11.2 x24 ag tires on 10” wide A rims to the fcub/154 axle. I was hoping to locate the two rim centers off the wheel weight holes.

[Glen]

Hi,
Just thought I would say, a Cub 154 LoBoy is not called a Farmall. They use the International name.

Below is a brochure pic.