This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
184 Steering Wheel
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- Posts: 7
- Joined: Wed Sep 11, 2019 9:51 am
- Zip Code: 70726
- Tractors Owned: 1963 Cub
184 Steering Wheel
Need to remove the steering wheel on a 184 I picked up the other day. Have soaked it with PB for the past 2 days and used the bearing puller with no luck. Just wanted to make sure I wasn't missing something before I put the fire to it.
-
- Cub Pro
- Posts: 4435
- Joined: Wed Dec 26, 2007 7:45 pm
- Zip Code: 32536
- Circle of Safety: Y
- Location: FL, Crestview
Re: 184 Steering Wheel
It’s a tapered splined shaft.
I’ve had to carefully cut down the side of the hub with a sawzall and use a chisel to peel the remaining hub off to get it loose.
I’ve had to carefully cut down the side of the hub with a sawzall and use a chisel to peel the remaining hub off to get it loose.
Screwstick #3934
FCub - LoBoy - Numbered Series - Power Unit Databases
FCub - LoBoy - Numbered Series - Power Unit Databases
-
- 10+ Years
- Posts: 2791
- Joined: Tue Jul 22, 2008 12:44 pm
- Zip Code: 48370
- Tractors Owned: 184
- Location: Oxford, MI
Re: 184 Steering Wheel
Even in good shape, they are a bear. I drilled 3 holes in mine (outside the washer diameter) and used a puller to remove it.
184 w/ Creeper & 3-Point
IH 3160a Mower
IH Model 15 Tiller
IH-54 Blade
IH 3160a Mower
IH Model 15 Tiller
IH-54 Blade
-
- 10+ Years
- Posts: 2791
- Joined: Tue Jul 22, 2008 12:44 pm
- Zip Code: 48370
- Tractors Owned: 184
- Location: Oxford, MI
Re: 184 Steering Wheel
I used a puller like this:
https://www.harborfreight.com/bolt-type ... 62620.html
Don't forget to thread the bolt back in the hub (quite a few threads, but not tight) before using the puller.
https://www.harborfreight.com/bolt-type ... 62620.html
Don't forget to thread the bolt back in the hub (quite a few threads, but not tight) before using the puller.
184 w/ Creeper & 3-Point
IH 3160a Mower
IH Model 15 Tiller
IH-54 Blade
IH 3160a Mower
IH Model 15 Tiller
IH-54 Blade
-
- Team Cub Mentor
- Posts: 20381
- Joined: Fri Jul 02, 2004 9:52 pm
- Zip Code: 65051
- Circle of Safety: Y
- Location: Mo. Linn
Re: 184 Steering Wheel
I use the same puller that I use to pull the engine front pulley.
I have an excuse. CRS.
-
- Posts: 7
- Joined: Wed Sep 11, 2019 9:51 am
- Zip Code: 70726
- Tractors Owned: 1963 Cub
Re: 184 Steering Wheel
Used a side grinder with a cutting wheel. This thing has been sitting in the open for a few years with no center steering wheel cover. It's all good now.
Thanks for the comments!
Thanks for the comments!
-
- Similar Topics
- Replies
- Views
- Last post
-
- 1
- 220
-
by Eugene
Tue Apr 25, 2023 6:57 pm
-
- 1
- 766
-
by Eugene
Fri Jun 16, 2023 6:16 pm
-
-
Steering Shaft Attachment(s)
by Ridgefield » Wed Aug 31, 2022 8:23 am » in Lo-Boy Series - 154, 184, 185 - 11
- 374
-
by Duner
Sat Sep 03, 2022 8:44 am
-
-
- 2
- 857
-
by outdoors4evr
Thu Jul 06, 2023 8:57 am
-
-
Steering column angle Attachment(s)
by Bronccat » Thu Jun 10, 2021 7:30 pm » in Lo-Boy Series - 154, 184, 185 - 0
- 314
-
by Bronccat
Thu Jun 10, 2021 7:30 pm
-
Return to “Lo-Boy Series - 154, 184, 185”
Who is online
Users browsing this forum: No registered users and 1 guest