This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
154 Stuck Valves
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 69
- Joined: Wed Apr 25, 2007 10:52 am
- Zip Code: 16218
- Location: Kittanning, PA
154 Stuck Valves
Hi All
Did you ever buy think you were getting a great deal and find out later it wasn't such a great deal? Well I have been looking for a snow plow for my 185 for a year or so. Don't know why for sure, we usually plow snow with a truck, but I kinda wanted one for the fun of it. So i found a 1969 154 for sale with a belly mower and a snow plow. Talked to the guy, he said it hadn't run for about 3 years cause it leaked gas so bad out of the carb. So I bought it figuring I would keep the plow and resale the tractor after I fixed the carb and got it running. Tractors in average to better average shape. I will post a few pics soon. Got it for what I thought was a good price, $850 and brought it home.
So tore the carb off, and guess what, someone had broke the idle tube off. AHHHH! $30, alot more than I think they are worth. Another $50 in rebuild stuff and gaskets and i got the carb mostly rebuilt. Still leaks a little gas when you crank the motor. The top half doesn't seal real well with the bottom. So have to work on that. But good enough to try and start the old girl.
After trying to start it, determined there is no spark. So the plugs looked original, so I bought new champions. Still no spark, but I figured what the heck when I have the plugs out I should see how much compression the tractor has. Bad got worse....cylinder closest to tractor seat had 30# on first revelution and max at 90# after 3 revs.
Anyone know if that is typical? But I am thinking not bad for an engine that sat for 3 years. The second cylinder had zero # pressure. Really bad and the front cylinder had zero #. Now I am thinking my great deal is not so great.
SO I pulled the valve cover off, and with no surprise two of the valves are not moving down.
I am open for suggestions here, but I am guessing my next step is to pull the head and try to remove the valves and clean them up or replace them. Let me know what you guys think. Also, would you try to clean the valves seats up in the tractor or pull the motor out and go all the way in the rebuild. If I have to pull the head I will check the bores to see how much they are worn.
Did you ever buy think you were getting a great deal and find out later it wasn't such a great deal? Well I have been looking for a snow plow for my 185 for a year or so. Don't know why for sure, we usually plow snow with a truck, but I kinda wanted one for the fun of it. So i found a 1969 154 for sale with a belly mower and a snow plow. Talked to the guy, he said it hadn't run for about 3 years cause it leaked gas so bad out of the carb. So I bought it figuring I would keep the plow and resale the tractor after I fixed the carb and got it running. Tractors in average to better average shape. I will post a few pics soon. Got it for what I thought was a good price, $850 and brought it home.
So tore the carb off, and guess what, someone had broke the idle tube off. AHHHH! $30, alot more than I think they are worth. Another $50 in rebuild stuff and gaskets and i got the carb mostly rebuilt. Still leaks a little gas when you crank the motor. The top half doesn't seal real well with the bottom. So have to work on that. But good enough to try and start the old girl.
After trying to start it, determined there is no spark. So the plugs looked original, so I bought new champions. Still no spark, but I figured what the heck when I have the plugs out I should see how much compression the tractor has. Bad got worse....cylinder closest to tractor seat had 30# on first revelution and max at 90# after 3 revs.
Anyone know if that is typical? But I am thinking not bad for an engine that sat for 3 years. The second cylinder had zero # pressure. Really bad and the front cylinder had zero #. Now I am thinking my great deal is not so great.
SO I pulled the valve cover off, and with no surprise two of the valves are not moving down.
I am open for suggestions here, but I am guessing my next step is to pull the head and try to remove the valves and clean them up or replace them. Let me know what you guys think. Also, would you try to clean the valves seats up in the tractor or pull the motor out and go all the way in the rebuild. If I have to pull the head I will check the bores to see how much they are worn.
Steve
1962 Cub Lo-boy restored w/60 woods deck and snow plow
1972 Standard Cub Original w/fast hitch w/snowplow
1975 Cub 185
1969 Cub 154 w/60" deck and snow plow
Fast hitch plow
42FH woods mower
1962 Cub Lo-boy restored w/60 woods deck and snow plow
1972 Standard Cub Original w/fast hitch w/snowplow
1975 Cub 185
1969 Cub 154 w/60" deck and snow plow
Fast hitch plow
42FH woods mower
-
- Cub Pro
- Posts: 10290
- Joined: Mon Oct 24, 2005 8:35 pm
- Zip Code: 23962
- eBay ID: dmb2613
- Circle of Safety: Y
- Location: VA. Randolph
Re: 154 Stuck Valves
Spray the valves with PB blaster Liquid Wrench, etc. Work them up and down, with a pry bar. Put a little oil in each cylinder. Prime the oil pump before you try to start it. File or replace the points. you should be good to go then
Boss
Boss
IN GOD WE TRUST
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
-
- Team Cub Mentor
- Posts: 20399
- Joined: Fri Jul 02, 2004 9:52 pm
- Zip Code: 65051
- Circle of Safety: Y
- Location: Mo. Linn
Re: 154 Stuck Valves
Typical. Usually do or take 5 compression strokes to get an accurate reading per cylinder test.spgeid wrote:Cylinder closest to tractor seat had 30# on first revolution and max at 90# after 3 revs. Typical?
Follow Boss Hog's suggestions. With hood off you can easily reach the spark plug holes. Obtain one of the plastic tubes that comes with some aerosol containers. Try to spray solvent under each valve head. Inside the valve spring chamber, spray the heck out of each valve stem.
I would free up the valves, get the engine running. Seafoam in fuel and crankcase. Operate the engine for a while, perhaps 6 months or so to determine how it ran and condition.
I have an excuse. CRS.
-
- 10+ Years
- Posts: 69
- Joined: Wed Apr 25, 2007 10:52 am
- Zip Code: 16218
- Location: Kittanning, PA
Re: 154 Stuck Valves
Thanks guys! that makes me feel a little better. I tore most of it apart last night. I will give the Pb blaster a try before I take the head off her.
Steve
1962 Cub Lo-boy restored w/60 woods deck and snow plow
1972 Standard Cub Original w/fast hitch w/snowplow
1975 Cub 185
1969 Cub 154 w/60" deck and snow plow
Fast hitch plow
42FH woods mower
1962 Cub Lo-boy restored w/60 woods deck and snow plow
1972 Standard Cub Original w/fast hitch w/snowplow
1975 Cub 185
1969 Cub 154 w/60" deck and snow plow
Fast hitch plow
42FH woods mower
-
- 10+ Years
- Posts: 2795
- Joined: Tue Jul 22, 2008 12:44 pm
- Zip Code: 48370
- Tractors Owned: 184
- Location: Oxford, MI
Re: 154 Stuck Valves
Not much to see with the head off. Pull the valve cover (behind the carb manifold) and slide the cover down so you can see the valve stems. The cover doesn't come all the way out without pulling the carb, but it slides down far enough to get out of the way. Use a piece of wood or a soft screwdriver to work the valves down that are currently stuck in the up position. Use a good penetrating oil.
Again, good advice from others with adding Seafoam to the oil and fuel and giving it a good workout.
Again, good advice from others with adding Seafoam to the oil and fuel and giving it a good workout.
184 w/ Creeper & 3-Point
IH 3160a Mower
IH Model 15 Tiller
IH-54 Blade
IH 3160a Mower
IH Model 15 Tiller
IH-54 Blade
-
- 10+ Years
- Posts: 7703
- Joined: Thu Aug 19, 2004 2:31 pm
- Zip Code: 10314
- Location: NY Staten Island & Franklin
Re: 154 Stuck Valves
If that is all you have for problems you did good.
Bill
"Life's tough.It's even tougher if you're stupid."
- John Wayne
" We hang petty thieves and appoint the great ones to public office."
- Aesop
"Life's tough.It's even tougher if you're stupid."
- John Wayne
" We hang petty thieves and appoint the great ones to public office."
- Aesop
-
- 10+ Years
- Posts: 101
- Joined: Tue Aug 21, 2012 10:21 am
- Zip Code: 16426
- Tractors Owned: 1951 Farmall Super A
1958 Farmall Cub - Circle of Safety: Y
- Location: McKean PA
Re: 154 Stuck Valves
My experience is that valve operation is key to having a healthy engine. I recommend removing the head, cleaning away the carbon, freeing-up the valve stems, inspection and servicing worn valves and seats and related hardware and making an assessment of the cylinders and piston rings while they're exposed. You'll need a valve spring compressor tool to remove the valves. Once you determine what needs replacement, (re-)set the valve clearances and you'll have a good runner. The resources to learn about this engine and how to evaluate and service it are available on this website.
Ironlegs John
-
- Cub Pro
- Posts: 10290
- Joined: Mon Oct 24, 2005 8:35 pm
- Zip Code: 23962
- eBay ID: dmb2613
- Circle of Safety: Y
- Location: VA. Randolph
Re: 154 Stuck Valves
Just do as Eugene and I have said, there is a 90% chance that the head will not need to come off. Cubs are like Golf, The guy that has played 3 times will give the guy that has played once Golf lessons
Boss
Boss
IN GOD WE TRUST
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
-
- Team Cub Mentor
- Posts: 20399
- Joined: Fri Jul 02, 2004 9:52 pm
- Zip Code: 65051
- Circle of Safety: Y
- Location: Mo. Linn
Re: 154 Stuck Valves
Yup. What Boss Hog said. You may find that the engine in petty good shape. Just get engine running, fluid change, tune up, perhaps flush the block. Operate for a period of time - this will provide an opportunity to evaluate entire tractor.
Typically the Cub Low-Boy 154 is/was used as a lawn mower. Guessing, other than a bunch of piddly things, tractor is in pretty good condition.
Typically the Cub Low-Boy 154 is/was used as a lawn mower. Guessing, other than a bunch of piddly things, tractor is in pretty good condition.
I have an excuse. CRS.
-
- Cub Pro
- Posts: 28706
- Joined: Sun Feb 02, 2003 8:37 pm
- Zip Code: E1A7J3
- Skype Name: R.H. "Rudi" Saueracker, SSM
- Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger - Circle of Safety: Y
- Twitter ID: Rudi Saueracker, SSM
- Location: NB Dieppe, Canada
Re: 154 Stuck Valves
For $850.00 not only did you get a good deal but you stole that 154. I am not a huge fan of them but for a mower I don't think they can be beat especially for estate sized properties.
Gotta agree with David and Eugene. You DO NOT have to take that head off to get these valves free. I have just been through this with my '47
Subject: Compression problem
Suggest you use a piece of wooden dowel instead of the screwdriver. Less chance of damaging the valve itself. Just keep tapping, lifting and spraying until the valves travel full cycle by themselves when rotating the hand crank.
Gotta agree with David and Eugene. You DO NOT have to take that head off to get these valves free. I have just been through this with my '47
Subject: Compression problem
Rudi wrote:Stuck valves
Why do I know this Dealing with the exact same problem with my 47 - Granny - here is the thread - Stuck Valves. Pull the plugs on 2 and 3, pour in 1 tablespoon of oil, rotate engine by hand a couple times. Take the side valve cover off. Spray the valves/valve springs and tappets with your favourite penetrating oil. I like Nut Buster and Loctite's Solvo-Rust. Rotate the engine by hand with/without hand crank again but while watching the valves functioning. You should see whether it is exhaust or intake valves that are sticking. Take a standard screwdriver and very.. very gently tap the offending valves once or twice. I used a dead blow mallet to reduce the shock to the valves. Spray the valves in the spark plug holes with your favourite penetrating oil. Rotate the engine by hand a couple times hopefully twice each cycle. Continue to do this until the valves drop and drop they will. They are just stuck up because of carbon/oxidation.
After the valves have dropped, add another tablespoon of oil to each spark plug hole and hand crank the engine again. When you feel the valves are moving freely, add some SeaFoam to both the gas tank and the crankcase according to the directions on the label. This will help clean the valves/valve stems and guides. It may still take a bit to get the engine to fire up, but this is the first step.
Suggest you use a piece of wooden dowel instead of the screwdriver. Less chance of damaging the valve itself. Just keep tapping, lifting and spraying until the valves travel full cycle by themselves when rotating the hand crank.
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship
-
- 10+ Years
- Posts: 2385
- Joined: Sat Feb 07, 2004 3:03 pm
- Zip Code: 01035
- eBay ID: jayrod01035
- Tractors Owned: 1975 F cub, 1965 F cub, 1949 parts cub,1953 F cub 1942 JD LA, 1988 JD 330 diesel
- Circle of Safety: Y
- Location: MA. Hadley
Re: 154 Stuck Valves
I 'd listen to Boss , Rudy and Eugene for sure, they have always given me great advice.
Joe
22 mower 5', grader blade, 189 two way moldboard plow, cultivators ,danco C2 mower,1961 Comet, 1984 BMW 318i
Part of life is falling down, living is getting back up.
22 mower 5', grader blade, 189 two way moldboard plow, cultivators ,danco C2 mower,1961 Comet, 1984 BMW 318i
Part of life is falling down, living is getting back up.
-
- Team Cub Mentor
- Posts: 20399
- Joined: Fri Jul 02, 2004 9:52 pm
- Zip Code: 65051
- Circle of Safety: Y
- Location: Mo. Linn
Re: 154 Stuck Valves
Rudy and Eugene for sure. Not so sure about Boss, even though he said it first. did I say that.Joe Malinowski wrote:I 'd listen to Boss , Rudy and Eugene for sure, they have always given me great advice.
With the hood off and spark plugs removed - with light you can see the edge of the stuck valves. After soaking in solvent, bit of hard wood dowel to tap down any valve still sticking. May take a few or number of tries to fully free up stuck valves. Tap down, solvent spray, rotate engine to lift/stick valve - tap down. Sat 3 years, shouldn't be stuck that tight.
I have an excuse. CRS.
-
- 10+ Years
- Posts: 2385
- Joined: Sat Feb 07, 2004 3:03 pm
- Zip Code: 01035
- eBay ID: jayrod01035
- Tractors Owned: 1975 F cub, 1965 F cub, 1949 parts cub,1953 F cub 1942 JD LA, 1988 JD 330 diesel
- Circle of Safety: Y
- Location: MA. Hadley
Re: 154 Stuck Valves
???????
/
/
Joe
22 mower 5', grader blade, 189 two way moldboard plow, cultivators ,danco C2 mower,1961 Comet, 1984 BMW 318i
Part of life is falling down, living is getting back up.
22 mower 5', grader blade, 189 two way moldboard plow, cultivators ,danco C2 mower,1961 Comet, 1984 BMW 318i
Part of life is falling down, living is getting back up.
-
- Cub Pro
- Posts: 10540
- Joined: Mon Aug 09, 2004 10:14 pm
- Zip Code: 02840
- Location: RI, Newport
Re: 154 Stuck Valves
I played golf once.... Only once took a head off (I could explain the mushroom theory).
I go with pull the valve cover and get them lubed and free. Change the oil and filter (gets whatever you used on the valve out too), prime the oil pump and give it a shot.
Good cheap tool to have is a light you put on a plug wire. I am with Boss on the points.
There is a lot of good info on carbs here, try a search.
My guess is you got a good deal. Better deal if it was stored under cover.
I go with pull the valve cover and get them lubed and free. Change the oil and filter (gets whatever you used on the valve out too), prime the oil pump and give it a shot.
Good cheap tool to have is a light you put on a plug wire. I am with Boss on the points.
There is a lot of good info on carbs here, try a search.
My guess is you got a good deal. Better deal if it was stored under cover.
1971 Cub (Rufus) 1950 Cub (Cathy) 1965 Lo Boy Fast Hitch (Nameless III) 1970 Cub 1000 Loader & Fast Hitch (Lee)
-
- 10+ Years
- Posts: 69
- Joined: Wed Apr 25, 2007 10:52 am
- Zip Code: 16218
- Location: Kittanning, PA
Re: 154 Stuck Valves
Great advised from all. Thanks Guys. I got the carb and exhaust manifold off. SO lots of room to work on it now. One of valves came loose right away with one spray and tapping it down. The other is very tight. I can get it to come down but it takes a lot of torque on the front pully to move it back up and then it sticks again and has to be tapped down again. I will soak it for a few days and see if it gets any looser.
Steve
1962 Cub Lo-boy restored w/60 woods deck and snow plow
1972 Standard Cub Original w/fast hitch w/snowplow
1975 Cub 185
1969 Cub 154 w/60" deck and snow plow
Fast hitch plow
42FH woods mower
1962 Cub Lo-boy restored w/60 woods deck and snow plow
1972 Standard Cub Original w/fast hitch w/snowplow
1975 Cub 185
1969 Cub 154 w/60" deck and snow plow
Fast hitch plow
42FH woods mower
-
- Similar Topics
- Replies
- Views
- Last post
-
- 7
- 696
-
by BigBill
Fri May 28, 2021 11:29 pm
-
-
Stuck brake drum and spacer Attachment(s)
by rednax » Sun Feb 06, 2022 2:35 pm » in Lo-Boy Series - 154, 184, 185 - 6
- 544
-
by outdoors4evr
Mon Feb 28, 2022 7:30 am
-
Return to “Lo-Boy Series - 154, 184, 185”
Who is online
Users browsing this forum: No registered users and 1 guest