This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
International tiller question.
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
International tiller question.
Does anybody out there have an International tiller that goes behind a loboy ? I have one that came with mine but dont have a book or anything so will have to wing it. Thought someone might have one and be able to answer some questions. Harold
-
- Cub Pro
- Posts: 28706
- Joined: Sun Feb 02, 2003 8:37 pm
- Zip Code: E1A7J3
- Skype Name: R.H. "Rudi" Saueracker, SSM
- Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger - Circle of Safety: Y
- Twitter ID: Rudi Saueracker, SSM
- Location: NB Dieppe, Canada
Re: International tiller question.
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship
-
- 10+ Years
Re: International tiller question.
Thanks Rudi. Do you have one of these?
-
- Cub Pro
- Posts: 28706
- Joined: Sun Feb 02, 2003 8:37 pm
- Zip Code: E1A7J3
- Skype Name: R.H. "Rudi" Saueracker, SSM
- Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger - Circle of Safety: Y
- Twitter ID: Rudi Saueracker, SSM
- Location: NB Dieppe, Canada
Re: International tiller question.
Nope I don't. I sure would like to have a tiller one day though.
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship
-
- 10+ Years
- Posts: 2791
- Joined: Tue Jul 22, 2008 12:44 pm
- Zip Code: 48370
- Tractors Owned: 184
- Location: Oxford, MI
Re: International tiller question.
I have one, what's your question?
184 w/ Creeper & 3-Point
IH 3160a Mower
IH Model 15 Tiller
IH-54 Blade
IH 3160a Mower
IH Model 15 Tiller
IH-54 Blade
-
- 10+ Years
Re: International tiller question.
Was wondering if anybody has a manual on one of these. I havent had a lot of time to try mine out, but it seems it runs rough and pulls hard when let clear down. I am not sure but thinking about it now I wonder if I have it tilted too far forward and causing to much bend in u joints. I have it on a 154 loboy.
-
- 10+ Years
Re: International tiller question.
Also would like to know where I might find some new tiller tines.
-
- 10+ Years
- Posts: 2791
- Joined: Tue Jul 22, 2008 12:44 pm
- Zip Code: 48370
- Tractors Owned: 184
- Location: Oxford, MI
Re: International tiller question.
The tiller should stand upright during use (perpendicular to the ground). Adjust your top link out or in as necessary to obtain this. The PTO shaft is not "straight" but is offset slightly to one side when mounted. The tiller should run smoothly. Check the gear lube in the angle drive and the chain case. Might not hurt to check out the tension on the chain as well.
The tiller will work your tractor hard. Run at full throttle and use creeper gear (1st). Even with this it may stall the tractor in heavy clay and roots. The tiller does a great job. A mowed weedy area turns to usable garden after two to three passes spread over 2 weeks.
Rudi pointed toward the parts manual above. Haven't seen any other manuals for the tiller.
The tines are available and expensive. I asked the same question in this topic. Members did point to other sources than the dealer, but the cost is roughly the same.
viewtopic.php?f=29&t=76464
The tiller will work your tractor hard. Run at full throttle and use creeper gear (1st). Even with this it may stall the tractor in heavy clay and roots. The tiller does a great job. A mowed weedy area turns to usable garden after two to three passes spread over 2 weeks.
Rudi pointed toward the parts manual above. Haven't seen any other manuals for the tiller.
The tines are available and expensive. I asked the same question in this topic. Members did point to other sources than the dealer, but the cost is roughly the same.
viewtopic.php?f=29&t=76464
184 w/ Creeper & 3-Point
IH 3160a Mower
IH Model 15 Tiller
IH-54 Blade
IH 3160a Mower
IH Model 15 Tiller
IH-54 Blade
-
- Similar Topics
- Replies
- Views
- Last post
-
- 3
- 426
-
by Gary Dotson
Tue Jun 08, 2021 6:26 am
-
- 4
- 950
-
by Gary Dotson
Tue May 16, 2023 7:54 am
-
-
International 184 PTO belts
by treeman53 » Fri May 20, 2022 1:23 pm » in Lo-Boy Series - 154, 184, 185 - 6
- 364
-
by outdoors4evr
Thu Jun 16, 2022 6:13 am
-
-
-
international 50 snow thrower
by Ottomechanic » Sun Apr 17, 2022 6:03 pm » in Lo-Boy Series - 154, 184, 185 - 1
- 221
-
by outdoors4evr
Tue Apr 19, 2022 5:53 am
-
-
-
Looking for 12 volt 3 wire alternator wiring diagram with ballast resistor for 1971 international cub
by Kelly » Fri Nov 10, 2023 12:39 pm » in Lo-Boy Series - 154, 184, 185 - 3
- 869
-
by Gary Dotson
Sat Nov 11, 2023 8:36 am
-
Return to “Lo-Boy Series - 154, 184, 185”
Who is online
Users browsing this forum: No registered users and 1 guest