I had a couple picnic tables listed on Craigslist and a guy stopped by to get one. He then asked if I could make two more for him to pick up in June. Since I am swamped with trying to get the garden in as well as get ready for the Bash I told him June would be best. Then he asked if I made swings. I showed him the picture of the one I build and he said he wanted one. I said that would be no problem to have ready in June also. Nope, that wasn't gonna work. He needed it for Mother's Day. That was pushing my schedule a little tight, but I couldn't resist getting some thing done for a mother. I will try to work on my resistance a little harder next time. He was happy that I had it done in time.
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
I made a little time for this
-
- Team Cub
- Posts: 24273
- Joined: Tue Aug 07, 2007 3:39 pm
- Zip Code: 45030
- Tractors Owned: At This Time
40 Farmall Cubs (Round Hood)
2 Farmall Cub (Square Hood)
2 IH Cubs (Square Hood)
5 Lo-Boys (Round Hood)
2 Lo-Boys (Square Hood)
2 Farmall 404's
1 Farmall H
1 Ferguson 20
1 Cub Cadet 125
1 Kubota B-7100 - Circle of Safety: Y
- Location: OH, New Haven (Hamilton County)
I made a little time for this
There are two ways to get enough Cubs. One is to continue to accumulate more and more. The other is to desire less.
-
- 10+ Years
- Posts: 935
- Joined: Tue Apr 08, 2008 7:01 pm
- Zip Code: 19344
- Circle of Safety: Y
- Location: PA, Honey Brook
Re: I made a little time for this
Hey that's really nice work there Bill.
I'll take 2 as well. For Mother's Day !
Anyway it's nice you could help the guy out.
Russ
I'll take 2 as well. For Mother's Day !
Anyway it's nice you could help the guy out.
Russ
1979 International Cub (Artie),193 plow,22 sickle mower,144 cultivator,54a blade,59" belly mower,wheel weights
1944 John Deere B , A-3 B-3 two way plow.....Grandpa's Deere,Still can't find his FARMALL A
1944 John Deere B , A-3 B-3 two way plow.....Grandpa's Deere,Still can't find his FARMALL A
-
- Cub Pro
- Posts: 1906
- Joined: Tue Jan 18, 2011 9:16 am
- Zip Code: 72940
- Tractors Owned: 1951 Farmall Cub, 152 disk plow, 2 gang disk, belly mower, sickle mower
1949 Farmall Cub, cultivator, moldboard plow, disk,front blade. Cub Cadet, LTX1045 Mower. Cub Cadet's 109, 125, 1000, and 1250
1961 cub c2 belly mower and full blade. 48 cub manual lift with cultivators.
1947 Cub - Circle of Safety: Y
- Location: Huntington, AR
Re: I made a little time for this
Bill, now that you're retired -- how did you ever find time to hold down a job? Good looking swing.
-
- Cub Pro
- Posts: 7760
- Joined: Mon Jun 22, 2009 6:56 am
- Zip Code: 64070
- Tractors Owned: 1942 Farmall AV, serial #87025
1947 Farmall Circle Cub, serial #2116
1948 Farmall Cub, serial #46066 - Circle of Safety: Y
- Location: Lone Jack, MO
Re: I made a little time for this
Looks like you did a good job! I know your friend's mother will be pleased.
Will your friend put a finish on the swing or leave it natural?
Will your friend put a finish on the swing or leave it natural?
-
- Team Cub
- Posts: 24273
- Joined: Tue Aug 07, 2007 3:39 pm
- Zip Code: 45030
- Tractors Owned: At This Time
40 Farmall Cubs (Round Hood)
2 Farmall Cub (Square Hood)
2 IH Cubs (Square Hood)
5 Lo-Boys (Round Hood)
2 Lo-Boys (Square Hood)
2 Farmall 404's
1 Farmall H
1 Ferguson 20
1 Cub Cadet 125
1 Kubota B-7100 - Circle of Safety: Y
- Location: OH, New Haven (Hamilton County)
Re: I made a little time for this
Thanks for the comments guys.
Stanton, I don't know how he will stain or paint it. The guy just answered an ad I had on Craigslist for something else and asked if I built swings. He said he needed it for his wife as a mother's Day gift.
Stanton, I don't know how he will stain or paint it. The guy just answered an ad I had on Craigslist for something else and asked if I built swings. He said he needed it for his wife as a mother's Day gift.
There are two ways to get enough Cubs. One is to continue to accumulate more and more. The other is to desire less.
-
- Cub Pro
- Posts: 2780
- Joined: Tue Jan 10, 2006 12:03 am
- Zip Code: 15522
- Circle of Safety: Y
- Location: PA. Bedford (Centerville)
Re: I made a little time for this
Looking good Bill.
David Dee Mock-Leonard
Nothing is foolproof to a sufficiently talented fool.
Some days it's not worth chewing through the restraints
Nothing is foolproof to a sufficiently talented fool.
Some days it's not worth chewing through the restraints
-
- 10+ Years
- Posts: 1203
- Joined: Fri Apr 06, 2012 6:30 pm
- Zip Code: 00000
Re: I made a little time for this
Very Impressive
Bernard,
Donegal Cub.
Bernard,
Donegal Cub.
-
- 10+ Years
- Posts: 3736
- Joined: Sun Jul 13, 2008 10:05 pm
- Zip Code: 45067
- Tractors Owned: 1951 Cub, 2-1955 Loboy w FH, a few plows, discs, mowers, blades, carrier & such
Several '61 CC Originals, Cub Cadet 100, several 102's & 122's, 124, various CC options & implements, #1Trailer, 1963 Springfield, JD 770, Ford 8N - Circle of Safety: Y
- Location: OH, Trenton
Re: I made a little time for this
Bill,
A lot of activity... you could sure use a workshop there!
Looks good,
A lot of activity... you could sure use a workshop there!
Looks good,
David
-
- Team Cub
- Posts: 24273
- Joined: Tue Aug 07, 2007 3:39 pm
- Zip Code: 45030
- Tractors Owned: At This Time
40 Farmall Cubs (Round Hood)
2 Farmall Cub (Square Hood)
2 IH Cubs (Square Hood)
5 Lo-Boys (Round Hood)
2 Lo-Boys (Square Hood)
2 Farmall 404's
1 Farmall H
1 Ferguson 20
1 Cub Cadet 125
1 Kubota B-7100 - Circle of Safety: Y
- Location: OH, New Haven (Hamilton County)
Re: I made a little time for this
dgrapes59 wrote:Bill,
A lot of activity... you could sure use a workshop there!
Looks good,
Yeah, Maybe I should add on to the barn.
There are two ways to get enough Cubs. One is to continue to accumulate more and more. The other is to desire less.
-
- Cub Pro
- Posts: 1906
- Joined: Tue Jan 18, 2011 9:16 am
- Zip Code: 72940
- Tractors Owned: 1951 Farmall Cub, 152 disk plow, 2 gang disk, belly mower, sickle mower
1949 Farmall Cub, cultivator, moldboard plow, disk,front blade. Cub Cadet, LTX1045 Mower. Cub Cadet's 109, 125, 1000, and 1250
1961 cub c2 belly mower and full blade. 48 cub manual lift with cultivators.
1947 Cub - Circle of Safety: Y
- Location: Huntington, AR
Re: I made a little time for this
Yeah, a big wood working shop would be nice to have all the tools handy.
-
- Similar Topics
- Replies
- Views
- Last post
-
-
We made it to the Cub Tug! Attachment(s)
by Barnyard » Wed Jul 27, 2022 9:32 pm » in CubFest and Tractor Show Announcements & Discussions - 15
- 588
-
by Don McCombs
Sun Jul 31, 2022 9:51 pm
-
-
-
Look at what Dale made me do..... Lol Attachment(s)
by Drfting1 » Fri Mar 04, 2022 8:15 pm » in Farmall Cub - 13
- 611
-
by Pap
Wed Mar 09, 2022 5:48 pm
-
-
-
So I made this handcrank: Attachment(s)
by Timothy moore » Sun May 07, 2023 10:59 pm » in Farmall Cub - 7
- 514
-
by T-Mo
Sun May 21, 2023 4:53 am
-
-
- 3
- 392
-
by Rick Prentice
Mon Jun 07, 2021 8:24 am
-
-
The Cub Tug made the local paper Attachment(s)
by 1541 » Sun Jul 23, 2023 4:10 pm » in CubFest and Tractor Show Announcements & Discussions - 2
- 1260
-
by Winfield Dave
Mon Jul 24, 2023 8:46 am
-
Who is online
Users browsing this forum: No registered users and 0 guests