Here are a couple of pics of the Hood a couple of guys might be interested in. It measures approx. 21 5/8" long and approx. 21" wide.
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Power Unit Hood Pics
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- Cub Pro
- Posts: 2809
- Joined: Sun Feb 02, 2003 2:31 am
- Zip Code: 00000
- Location: Puyallup, WA.
-
- 10+ Years
-
- Cub Pro
- Posts: 2809
- Joined: Sun Feb 02, 2003 2:31 am
- Zip Code: 00000
- Location: Puyallup, WA.
WKPoor wrote:Are you taking into account overlap? Either way if no one needs it here I'm going to Ebay it.
On mine there are 2-brackets with holes in them on each side for I imagine the hood to bolt to. Front brackets are attached to the radiator and the rear brackets are attached to the firewall panel between engine & gas-tank. From side to side the width is 17&3/4 inches. I dont know but maybe the bottom sides of the hood panel gets pulled in that extra inch & a`half when fastening.
I have a friend a few miles down the road with a baler sitting out in his back forty with a power-unit like mine so if his still has the hood I can get a hands on look at how his fits. I haven`t seen it for a couple years and I dont remember if it had a hood but carb & other parts were missing.
Then came Bronson
-
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
-
- 10+ Years
The sides are flared out quite a bit when I measured it. I'll check and see but I'm a thinkin they would be closer to 18" if they were pushed in straight.
Who moved this? I haven't said a thing about anything for sale yet. If this item was for sale thats were I would have put it. We are just trying to determine what this goes on for now.
Who moved this? I haven't said a thing about anything for sale yet. If this item was for sale thats were I would have put it. We are just trying to determine what this goes on for now.
-
- 10+ Years
- Posts: 1750
- Joined: Sun Feb 02, 2003 1:09 pm
- Zip Code: 64784
- Circle of Safety: Y
- Location: Mo, Sheldon
-
- Cub Pro
- Posts: 2809
- Joined: Sun Feb 02, 2003 2:31 am
- Zip Code: 00000
- Location: Puyallup, WA.
WKPoor wrote:Who moved this? I haven't said a thing about anything for sale yet. If this item was for sale thats were I would have put it. We are just trying to determine what this goes on for now.
I dont know who moved it but I am moving it back so I can use the pics later on for referance before it times out.
Then came Bronson
-
- Similar Topics
- Replies
- Views
- Last post
-
-
Owners of Howard CD6 Despeeder/Speed Reduction Unit
by FarmallCub14660 » Thu Sep 15, 2022 8:16 pm » in Other Tractors and Machinery - 4
- 265
-
by Bill Hudson
Sun Sep 25, 2022 10:45 am
-
-
-
AVERY V hood decals Attachment(s)
by staninlowerAL » Sun Feb 11, 2024 9:38 pm » in Other Tractors and Machinery - 6
- 177
-
by staninlowerAL
Fri Mar 08, 2024 9:31 pm
-
-
-
My Allis B hood ornament Attachment(s)
by john2189 » Wed Mar 13, 2024 10:13 am » in Other Tractors and Machinery - 3
- 129
-
by Gary Dotson
Thu Mar 14, 2024 7:58 am
-
-
-
2022 Red Power Round Up Toy Tractors Attachment(s)
by Cub-Bud » Thu Jun 30, 2022 11:08 am » in Other Tractors and Machinery - 3
- 266
-
by Jeff Silvey
Sat Jul 02, 2022 12:14 pm
-
-
-
Generator starts but has no electrical power- fix Attachment(s)
by inairam » Sun Feb 13, 2022 4:17 pm » in Other Tractors and Machinery - 4
- 341
-
by John *.?-!.* cub owner
Thu Feb 17, 2022 9:34 pm
-
Return to “Other Tractors and Machinery”
Who is online
Users browsing this forum: No registered users and 2 guests