Can anybody help me out and tell me how wide a VAC is. I have not seen the tractor I am getting so I have no idea if it will fit through a 72" door or not. Wheels can come off as I do have some heavy dollies.
I am getting one in here at school to restore with my kids and I need to know if it will fit in my shop door or not. It is being donated to us to restore and raffle.
thanks
Jason
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Case VAC Dims
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 916
- Joined: Sun Feb 02, 2003 10:44 pm
- Zip Code: 60936
- Tractors Owned: 47 Cub SN 8664
48 Cub
50 Demo
54 Cub
3-55 Cub
2-56 Cub
55 LOBOY SN 876
57 LOBOY
58 French Cub
2- 60 LOBOY
69 Cub
54 Super M
42 H
48 H
57 300LP
57 450
Cub Cadet 123
Cub Cadet 149 - Circle of Safety: Y
- Location: Gibson City, IL
-
- Team Cub
- Posts: 11877
- Joined: Tue May 25, 2004 8:02 pm
- Zip Code: 80501
- Tractors Owned: Cubs, MH Pony, Shaw, Allis G, 1934 Silver King, JD LA and LI, Gibson D, David Bradley Tri-Trac
- Circle of Safety: Y
- Location: CO, Longmont
Re: Case VAC Dims
Jason, the books I have don't give that dimension, but the pictures show it has an extended axle to allow mounting two rear tires on each side. You'll need to make sure that is taken into account when someone measures theirs.
Bob
Bob
"We don't need to think more,
we need to think differently."
-Albert Einstein
we need to think differently."
-Albert Einstein
-
- Team Cub
- Posts: 17306
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
Re: Case VAC Dims
The rear tread is supposed to adjust from 48 to 80 inches with 88 inches optional. Looks like the wheels can be adjusted to fit but you may need a measurement on the axle tips.
-
- 10+ Years
- Posts: 916
- Joined: Sun Feb 02, 2003 10:44 pm
- Zip Code: 60936
- Tractors Owned: 47 Cub SN 8664
48 Cub
50 Demo
54 Cub
3-55 Cub
2-56 Cub
55 LOBOY SN 876
57 LOBOY
58 French Cub
2- 60 LOBOY
69 Cub
54 Super M
42 H
48 H
57 300LP
57 450
Cub Cadet 123
Cub Cadet 149 - Circle of Safety: Y
- Location: Gibson City, IL
Re: Case VAC Dims
I have asked to guy if I can come out and look at the tractor sometime this week and will get the dims. All I know it is a narrow front and needs a lot of cosmetic work.
Thanks
Thanks
-
- 10+ Years
- Posts: 1431
- Joined: Fri Jan 25, 2008 9:02 am
- Zip Code: 00000
- Circle of Safety: Y
Re: Case VAC Dims
I have a good set of fenders and grille for a VAC if you need them. Free for a good cause unless I have to ship.
-
- 10+ Years
- Posts: 327
- Joined: Mon Dec 08, 2008 8:28 pm
- Zip Code: 65018
- Tractors Owned: 1947 cub #11248
1948 #39811 trimmed dash
1950 VAC Case - Circle of Safety: Y
- Location: MO California
Re: Case VAC Dims
I have a 1950 VAC and the best I came up with was 80 1/2" tip to tip on the axle. With the wheels off you might be able to walk it through the doors one axle at a time.
Ron in Mid Missouri
Ron in Mid Missouri
-
- 10+ Years
- Posts: 916
- Joined: Sun Feb 02, 2003 10:44 pm
- Zip Code: 60936
- Tractors Owned: 47 Cub SN 8664
48 Cub
50 Demo
54 Cub
3-55 Cub
2-56 Cub
55 LOBOY SN 876
57 LOBOY
58 French Cub
2- 60 LOBOY
69 Cub
54 Super M
42 H
48 H
57 300LP
57 450
Cub Cadet 123
Cub Cadet 149 - Circle of Safety: Y
- Location: Gibson City, IL
Re: Case VAC Dims
Thanks Ron,
I have 71 1/2" to be exact. So I should be able to get it in atleast to work on. I guess once we get ready for paint we will have to find another location.
Thanks Again. This all helps big time.
I have 71 1/2" to be exact. So I should be able to get it in atleast to work on. I guess once we get ready for paint we will have to find another location.
Thanks Again. This all helps big time.
-
- Similar Topics
- Replies
- Views
- Last post
-
-
Case IH Combine Plant Tour at RPRU
by Bob McCarty » Sun Jun 18, 2023 10:00 am » in Other Tractors and Machinery - 4
- 1232
-
by Eugene
Mon Jun 19, 2023 10:17 am
-
Return to “Other Tractors and Machinery”
Who is online
Users browsing this forum: No registered users and 2 guests