This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link:
Privacy Policy

NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.

Other machinery question

All non-Cub/Cadet/IH/Farmall/Case tractor and machinery discussions.
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
larryfoster
10+ Years
10+ Years
Posts: 553
Joined: Sat Apr 19, 2008 4:17 pm
Location: Cowansville, Pa

Re: Other machinery question

Postby larryfoster » Fri Nov 23, 2012 1:51 pm

I'm still (or should I say Stihl) hoping to get this running.
I got the new carb the other day and got my machine back from the shop to try putting it on
Just put it on and tried.

Not even a burp to try to fire.

I have spark.

Getting gas. Spark plug was damp.

Tried factory settings on carb. 3/4 on each screw
Shop told me I have compression

Any one have ideas for this dumb old non-mechanic?

Probably need to resolve this soon since I only have a 14 day return

SPONSOR AD

Sponsor



Sponsor
 

Eugene
Team Cub Mentor
Team Cub Mentor
Posts: 20336
Joined: Fri Jul 02, 2004 9:52 pm
Zip Code: 65051
Circle of Safety: Y
Location: Mo. Linn

Re: Other machinery question

Postby Eugene » Fri Nov 23, 2012 4:13 pm

Remove spark plug. Turn engine over several times to clear air fuel mixture. Install new spark plug.

You have probably already done so.
I have an excuse. CRS.

larryfoster
10+ Years
10+ Years
Posts: 553
Joined: Sat Apr 19, 2008 4:17 pm
Location: Cowansville, Pa

Re: Other machinery question

Postby larryfoster » Fri Nov 23, 2012 4:34 pm

I have done all except for a NEW plug
Head to the store tonight.
Will let you know

Thanks

Just thought of something else .
The primer bulb was removed a while back but it was still able to start.
I couldn't see any gas in the clear line from the tank to the carb
Took the tank off and the line at that end. No gas came out at first. Took the in tank filter off and blew the line out and got a little out.
The plug gets wet but I wonder if I'm getting enough gas

User avatar
Barnyard
Team Cub
Team Cub
Posts: 24233
Joined: Tue Aug 07, 2007 3:39 pm
Zip Code: 45030
Tractors Owned: At This Time
40 Farmall Cubs (Round Hood)
2 Farmall Cub (Square Hood)
2 IH Cubs (Square Hood)
5 Lo-Boys (Round Hood)
2 Lo-Boys (Square Hood)
2 Farmall 404's
1 Farmall H
1 Ferguson 20
1 Cub Cadet 125
1 Kubota B-7100
Circle of Safety: Y
Location: OH, New Haven (Hamilton County)
Contact:

Re: Other machinery question

Postby Barnyard » Fri Nov 23, 2012 4:54 pm

larryfoster wrote:I couldn't see any gas in the clear line from the tank to the carb
Took the tank off and the line at that end. No gas came out at first. Took the in tank filter off and blew the line out and got a little out.
The plug gets wet but I wonder if I'm getting enough gas

If it has been a while since it has run then replace the fuel line. You hardware store will have the line. Mine had become brittle over the years and developed a small crack letting air in. Once that was replaced it fired right up. No guarantee this will help yours but the line is cheap enough.
There are two ways to get enough Cubs. One is to continue to accumulate more and more. The other is to desire less.

Circle of Safety

larryfoster
10+ Years
10+ Years
Posts: 553
Joined: Sat Apr 19, 2008 4:17 pm
Location: Cowansville, Pa

Re: Other machinery question

Postby larryfoster » Fri Nov 23, 2012 5:15 pm

That will have to wait until tomorrow
Thanks, Barnyard

Edit:
I don't know if it's cracked but it is brittle. 30 years old :oops:

User avatar
Bus Driver
10+ Years
10+ Years
Posts: 2917
Joined: Sat Feb 11, 2006 5:26 pm
Location: NC

Re: Other machinery question

Postby Bus Driver » Fri Nov 23, 2012 5:37 pm

I am not familiar with that piece of equipment. A search for TK-10 found this.
http://www.hobbytalk.com/bbs1/showthread.php?t=300762

I would also search the model number of the equipment and search the part number of the carburetor. I suspect that some carburetor would substitute and work well enough. But finding which one appears to be the problem.
Luck favors those who are prepared

Rodney51Cub
10+ Years
10+ Years
Posts: 517
Joined: Fri Feb 11, 2011 6:06 pm
Zip Code: 62995
Tractors Owned: 1951 Farmall Cub
1950 John Deere A
1949 Farmall Cub
1943 Farmall H
1940 Farmall H
1953 Farmall Super M
1962 Massey Ferguson 65
Circle of Safety: Y
Location: Southern Illinois

Re: Other machinery question

Postby Rodney51Cub » Fri Nov 23, 2012 7:51 pm

Might also clean the screen in the muffler. They do plug up over time and cause starting and running problems.
USAF 1976 - 1996

larryfoster
10+ Years
10+ Years
Posts: 553
Joined: Sat Apr 19, 2008 4:17 pm
Location: Cowansville, Pa

Re: Other machinery question

Postby larryfoster » Fri Nov 23, 2012 8:00 pm

One guy who worked on it a while back decided to take off the muffler.
I have one here to put on if I can get it working

User avatar
Rudi
Cub Pro
Cub Pro
Posts: 28706
Joined: Sun Feb 02, 2003 8:37 pm
Zip Code: E1A7J3
Skype Name: R.H. "Rudi" Saueracker, SSM
Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger
Circle of Safety: Y
Twitter ID: Rudi Saueracker, SSM
Location: NB Dieppe, Canada
Contact:

Re: Other machinery question

Postby Rudi » Fri Nov 23, 2012 10:35 pm

Bus Driver wrote:I would also search the model number of the equipment and search the part number of the carburetor. I suspect that some carburetor would substitute and work well enough. But finding which one appears to be the problem.


Larry has the correct carburetor, it is the TK model that fits this saw, the old 4112 model. However as mentioned before the parts for the Stihl FS 80 and the FS 80AV and the other models similar are no longer made - these are the older ones that were built in the late 70's and 80's. The parts are simply NLA from dealers - even in Germany ---- btdt. Finding them on :eBay: or possibly NOS in a dealership seem to be the only options. I have been searching for a couple years and still haven't found a whole lot.

Larry:

The gas line has to be replaced - brittle isn't good. Looks like you may need the filter as well - scroll down the page and you will see the one for the FS 80 - Fuel line - Banta Saw - 120-295. You will also need the primer bulb and it has to be the one that fits the bracket. That is one of the things that is stopping me. I have a new bulb but the bracket that the bulb and the lines mount to is damaged and that part I haven't been able to find. Here is the bulb on :eBay: STIHL Black Rubber Primer Bulb for Old Model FS80 FS90 I think I need to get my FS 80 AV down from the rack and spend a little bit of time with it.

I did some more research and I think you should download this file - stihl fs 80 (4112) Spare Parts List it is the spare parts list from Stihl itself. I downloaded it for myself .. and I think that it will be useful for our older saws.

Thanks for getting me energized to do the research some more and maybe get mine fixed. Let me know if this helps at all.
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship


larryfoster
10+ Years
10+ Years
Posts: 553
Joined: Sat Apr 19, 2008 4:17 pm
Location: Cowansville, Pa

Re: Other machinery question

Postby larryfoster » Fri Nov 23, 2012 10:58 pm

Sent my kid to the auto parts store- $6 for that little hose! :shock:
He's bringing it out in the AM. Got a new plug for the AM,too.

Not sure why a previous mechanic removed the primer bulb. He removed the whole assembly as well as the muffler which worked loose since it was new

It has started since then without it but have to pull a little bit more.
With the original carb, I could get it to start and run for a couple mins.
With both replacement carbs, can't even get it to start or even try to start.

If I can find a filter, I'll replace it. Wonder if TS would have one.This one isn't very old. First one lasted, maybe, 25 years. :roll:

Rudi, I saw another carb on Ebay today

Thanks everyone for the tips

User avatar
Rudi
Cub Pro
Cub Pro
Posts: 28706
Joined: Sun Feb 02, 2003 8:37 pm
Zip Code: E1A7J3
Skype Name: R.H. "Rudi" Saueracker, SSM
Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger
Circle of Safety: Y
Twitter ID: Rudi Saueracker, SSM
Location: NB Dieppe, Canada
Contact:

Re: Other machinery question

Postby Rudi » Sat Nov 24, 2012 7:41 am

Larry:

Look at the post above - the fuel filter is available -

Rudi wrote:Looks like you may need the filter as well - scroll down the page and you will see the one for the FS 80 - Fuel line - Banta Saw - 120-295.


I sure hope you have the mounting bracket - I haven't found that yet.

I will go look on :eBay: for the carb.
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship


larryfoster
10+ Years
10+ Years
Posts: 553
Joined: Sat Apr 19, 2008 4:17 pm
Location: Cowansville, Pa

Re: Other machinery question

Postby larryfoster » Sat Nov 24, 2012 9:05 am

The guy took the whole primer assembly off so I need it.
I'm trying to figure out what I did when I switched from the original carb which would fire and start to the next two that won't even attempt to fire
Might I have installed the carb s wrong in some way?

Edit:
Eureka!!! (Maybe)

Carb gasket. I'm using the original because that's all I have.
Think that could be it?

Can I use a Permatex?

larryfoster
10+ Years
10+ Years
Posts: 553
Joined: Sat Apr 19, 2008 4:17 pm
Location: Cowansville, Pa

Re: Other machinery question

Postby larryfoster » Sat Nov 24, 2012 11:15 am

Rudi, I bet this guy on ebay has your mounting bracket

dms62

He has a lot of old Stihls for parts

larryfoster
10+ Years
10+ Years
Posts: 553
Joined: Sat Apr 19, 2008 4:17 pm
Location: Cowansville, Pa

Re: Other machinery question

Postby larryfoster » Sat Nov 24, 2012 11:45 am

Replaced the plug and a new line. No fire still.
Just in case I cn't find a filter real quick locally, would it hurt to take the old one off to try it if it's plugged?

Edit: I don't think I'm getting any gas

User avatar
Rudi
Cub Pro
Cub Pro
Posts: 28706
Joined: Sun Feb 02, 2003 8:37 pm
Zip Code: E1A7J3
Skype Name: R.H. "Rudi" Saueracker, SSM
Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger
Circle of Safety: Y
Twitter ID: Rudi Saueracker, SSM
Location: NB Dieppe, Canada
Contact:

Re: Other machinery question

Postby Rudi » Sat Nov 24, 2012 6:35 pm

Larry:

They really look like common filters that you would find on the fuel line. Take it with you to your local small engine shop and they may have a temporary that can be installed on the line or even a close match. That would work. I imagine if the fuel is clean then the likelyhood of a problem starting it for a few minutes might be minimal. Sure would confirm the no start issue. Keep us posted ... oh and some pics of your Stihl would be nice. :D
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship



Return to “Other Tractors and Machinery”

Who is online

Users browsing this forum: No registered users and 3 guests